13 Porter Site plan Updated Sept 26

(INTERIOR) OF IRC - NJ EDITION FRAMING ANCHOR OR TOE NAILS. 8d NAIL @ 6" FRANK CUNHA III, AIA, NCARB O.C.(ALL PANEL EDGES) WOOD STRUCTURAL PANEL REGISTERED ARCHITECT

PANEL REGISTERED ARCHITECT (SEE DETAIL BELOW) NEW JERSEY #16411 8d NAIL AT 12" O.C. ON ALL FRAMING FC3 PROJECT NO. 26-NJ-052 MEMBERS NOT AT PANEL EDGES 6 TYPICAL OUTSIDE CORNER DET.

TOP PLATE DETAIL N.T.S. GYPSUM WALL BOARD INSTALLED IN ACCORDANCE WITH CHAPTER 7 (INTERIOR) OF IRC - NJ EDITION BATHROOM W.I.C 6'-9" KITCHEN

2nd FLOOR ALL DRAWINGS AND WRITTEN MATERIALS APPEARING HEREIN FIRST FLOOR WOOD STRUCTURAL PANEL INSTALLED CONSTITUTE ORIGINAL AND (2) 16d COMMON (SEE DETAIL BELOW)

(2) 16d COMMON (SEE DETAIL BELOW) UNPUBLISHED WORK OF THE 0" NAILS @ 12" O.C. ARCHITECT. THE REPRODUCTION (2) 2x4 OF THIS DRAWING FOR THE PURPOSE OF COPYING THIS WORK 1/2" GYP TOP PLATE

1/2" GYP TOP PLATE 8d NAIL @ 6" O.C. ALL FRAMING OR REVISING SAID DRAWING SHALL BOARD MEMBERS AT PANEL EDGES AND 12" BE CONSIDERED A VIOLATION OF O.C. ON ALL FRAMING MEMBERS NOT AT BOTH THE PROFESSIONAL CODE OF PANEL EDGES ETHICS AND A THEFT OF COMPANY

ASSETS, BOTH OF WHICH SHALL BE PROSECUTED TO THE FULLEST 7'-5" NEW BASEMENT/FOUNDATION EXTENT OF THE LAW AND CURRENT STATUTES.

INSIDE CORNER DET. Consultant: Aaron Gonzales, PhD 5 2x4 STUD BASEMENT @ 16" O.C. EXT. CORNER FRAMING FOR -8'-3" 2x4 SOLE STRUCTURAL PANEL SHTH'G PLATE

BASE MOULDING 1"=1'- 0" AS SELECTED BY OWNER FIRST FLOOR WOOD RAILING TO BE 2" DIAMETER

GRASPABLE AT ALL LOCATIONS TRANSVERSE SECTION 1 4" MAX. OPNG 1/4" = 1'-0" INTERIOR WALL DET. 3 FINISH FLOOR Scale: NTS REV. #