13 Porter Site plan Updated Sept 26

S drywall screws 12" o.c. PAN FLASHING INTERMEDIATE ROOF PLANES BUTT AGAINST VERTICAL SIDEWALLS STUDS, placed 2" beck on either side of FRAMING TO BE AT 12" O.C. CARBON MONOXIDE DETECTOR end joints. CO

end joints. CO OR CHIMNEYS. PANEL SHEATHING USED AS Joints offset 24" from base layer 6" CORNER BRACING, INSTALL WITH joints. S.D. SMOKE DETECTOR 3/8" LONG DIMENSION PARALLEL TO STUDS, 1/2"

1/2" 6" SILL FLASHING FOR NAIL FIN WINDOW HANGING PENDANT P STRUCTURAL PLYWOOD X

1/2" 6" PANEL ATTACHMENT FOR X-XXX SECTION SYMBOL DOUBLE EDGE WALL SHEATHING 1 hr FIRE RATE WALL- IN ACCORDANCE W/ 8/31/2026 11:43:28 AM NAIL SPACING UPLIFT & SHEAR N.T.S. 5/8" TYPE GYPSUM TYPE 'X' FOR INR. FIRE

N.T.S. 5/8" TYPE GYPSUM TYPE 'X' FOR INR. FIRE DOUBLE STUDS N.T.S. SEPERATION ON BOTH SIDES OF WALL ( 1 HOUR FIRE WINDOW OPENING DET. RATING) AS PER UL-305 4 SCALE:3/8"-1'-0" 2 SIMPSON MODEL #: WOOD STUDS- Nom 2 by 4 in. spaced 16 in. OC

max, effectively firestopped. HTT 16 HOLD DOWN STRUCTURE RIM BOARD SHEATHING JOINTS AND NAIL-HEADS-Joints covered with joint compound and paper tape. Joint compound and paper

tape may be omitted when square edge boards are used. CASING BEAD As an alternate , nom. 3/32 in. thick gypsum veneer plaster 3"x3"x.229" PLATE WASHER may be applied to the entire surface of classified veneer EXPANDED METAL LATH baseboard with the joints reinforced with paper tape. NOTE: 5/8" DIA x18" ANCHOR BOLT

Nailheads exposed or covered with joint compound. BASEMENT LEVEL SCRATCH COAT 16 ALL HOLD DOW STRAPS AND SEAR WALL 2x CONT. P.T. WOOD SILL 5/8" DIA THREADED ROD TY " P.

JOIST ( AS NOTED GYPSUM BOARD- 5/8 in. thick LOCATION REFEREED BY THE FLOOR PLAN - ON PLANS) paper or vinyl surface, with STRUCTURAL ENGINEER CONC. OR CMU FOUNDATION PROVIDE SOLID WD. beveled, square, or tapered edges, PROPOSED

PROPOSED applied either horizontally NOTE: PSL HDR. OR GDR. AS PER PLAN BLOCKING 16" O.C. @ or vertically. Gypsum panels CMU END BAYS PERP. TO FINISH ( SMOOTH OR