PB 22 10 Altera 769 LLC Filed Application with Exhibits Final Site Plan Phase 2

Custom Soil Resource Report Essex County, New Jersey BogB—Boonton loam, 3 to 8 percent slopes Map Unit Setting National map unit symbol: b066 Elevation: 50 to 500 feet Mean annual precipitation: 30 to 64 inches Mean annual air temperature: 46 to 79 degrees F Frost-free period: 131 to 178 days Farmland classification: All areas are prime farmland Map Unit Composition Boonton and similar soils: 80 percent Minor components: 20 percent Estimates are based on observations, descriptions, and transects of the mapunit. Description of Boonton Setting Landform: Ground moraines Landform position (three-dimensional): Upper third of mountainflank, center third of mountainflank Down-slope shape: Convex Across-slope shape: Linear Parent material: Coarse-loamy basal till derived from basalt Typical profile Oi - 0 to 1 inches: slightly decomposed plant material Oa - 1 to 3 inches: highly decomposed plant material A - 3 to 5 inches: loam BA - 5 to 8 inches: silt loam BE - 8 to 17 inches: silt loam Bt - 17 to 30 inches: silt loam Btx1 - 30 to 40 inches: gravelly fine sandy loam Btx2 - 40 to 47 inches: fine sandy loam CBt1 - 47 to 58 inches: loamy sand CBt2 - 58 to 72 inches: loamy sand Properties and qualities Slope: 3 to 8 percent Depth to restrictive feature: 20 to 36 inches to fragipan Drainage class: Well drained Runoff class: Low Capacity of the most limiting layer to transmit water (Ksat): Moderately low to moderately high (0.06 to 0.20 in/hr) Depth to water table: More than 80 inches Frequency of flooding: None Frequency of ponding: None Available water supply, 0 to 60 inches: Low (about 5.4 inches) Interpretive groups Land capability classification (irrigated): None specified Land

Available water supply, 0 to 60 inches: Low (about 5.4 inches) Interpretive groups Land capability classification (irrigated): None specified Land capability classification (nonirrigated): 2e Hydrologic Soil Group: C 13

Custom Soil Resource Report Hydric soil rating: No Minor Components Haledon Percent of map unit: 10 percent Landform: Ground moraines Landform position (three-dimensional): Upper third of mountainflank, center third of mountainflank Down-slope shape: Convex Across-slope shape: Linear Hydric soil rating: No Boonton, moderately well drained Percent of map unit: 10 percent Landform: Ground moraines Landform position (three-dimensional): Upper third of mountainflank, center third of mountainflank Down-slope shape: Convex Across-slope shape: Linear Hydric soil rating: No BogBc—Boonton loam, 0 to 8 percent slopes, extremely stony Map Unit Setting National map unit symbol: b128 Elevation: 50 to 500 feet Mean annual precipitation: 30 to 64 inches Mean annual air temperature: 46 to 79 degrees F Frost-free period: 131 to 178 days Farmland classification: Not prime farmland Map Unit Composition Boonton, extremely stony, and similar soils: 85 percent Minor components: 15 percent Estimates are based on observations, descriptions, and transects of the mapunit. Description of Boonton, Extremely Stony Setting Landform: Ground moraines Landform position (three-dimensional): Upper third of mountainflank, center third of mountainflank Down-slope shape: Convex Across-slope shape: Linear Parent material: Coarse-loamy basal till derived from basalt Typical profile Oi - 0 to 1 inches: slightly decomposed plant material Oa - 1 to 3 inches: highly decomposed plant material A - 3 to 5 inches: loam 14

Custom Soil Resource Report BA - 5 to 8 inches: silt loam BE - 8 to 17 inches: silt loam Bt - 17 to 30 inches: silt loam Btx1 - 30 to 40 inches: gravelly fine sandy loam Btx2 - 40 to 47 inches: fine sandy loam CBt1 - 47 to 58 inches: loamy sand CBt2 - 58 to 72 inches: loamy sand Properties and qualities Slope: 0 to 8 percent Surface area covered with cobbles, stones or boulders: 10.0 percent Depth to restrictive feature: 20 to 36 inches to fragipan Drainage class: Well drained Runoff class: Low Capacity of the most limiting layer to transmit water (Ksat): Moderately low to moderately high (0.06 to 0.20 in/hr) Depth to water table: More than 80 inches Frequency of flooding: None Frequency of ponding: None Available water supply, 0 to 60 inches: Low (about 5.4 inches) Interpretive groups Land capability classification (irrigated): None specified Land capability classification (nonirrigated): 7s Hydrologic Soil Group: C Ecological site: F144AY037MA - Moist Dense Till Uplands Hydric soil rating: No Minor Components Boonton, moderately well drained, extremely stony Percent of map unit: 10 percent Landform: Ground moraines Landform position (two-dimensional): Summit, shoulder Landform position (three-dimensional): Head slope, side slope Down-slope shape: Convex Across-slope shape: Linear Hydric soil rating: No Haledon, extremely stony Percent of map unit: 5 percent Landform: Ground moraines Landform position (two-dimensional): Summit, shoulder Landform position (three-dimensional): Head slope, side slope Down-slope shape: Convex Across-slope shape: Linear Hydric soil rating: No 15

Custom Soil Resource Report BouB—Boonton - Urban land, Boonton substratum complex, 0 to 8 percent slopes Map Unit Setting National map unit symbol: b12f Elevation: 50 to 500 feet Mean annual precipitation: 30 to 64 inches Mean annual air temperature: 46 to 79 degrees F Frost-free period: 131 to 178 days Farmland classification: Not prime farmland Map Unit Composition Boonton and similar soils: 50 percent Urban land, boonton substratum: 40 percent Minor components: 10 percent Estimates are based on observations, descriptions, and transects of the mapunit. Description of Boonton Setting Landform: Ground moraines Landform position (three-dimensional): Upper third of mountainflank, center third of mountainflank Down-slope shape: Convex Across-slope shape: Linear Parent material: Coarse-loamy basal till derived from basalt Typical profile A - 0 to 5 inches: loam BA - 5 to 8 inches: silt loam BE - 8 to 17 inches: silt loam Bt - 17 to 30 inches: silt loam Btx1 - 30 to 40 inches: gravelly fine sandy loam Btx2 - 40 to 47 inches: fine sandy loam CBt1 - 47 to 58 inches: loamy sand CBt2 - 58 to 72 inches: loamy sand Properties and qualities Slope: 0 to 8 percent Depth to restrictive feature: 20 to 36 inches to fragipan Drainage class: Well drained Runoff class: Low Capacity of the most limiting layer to transmit water (Ksat): Moderately low to moderately high (0.06 to 0.20 in/hr) Depth to water table: More than 80 inches Frequency of flooding: None Frequency of ponding: None Available water supply, 0 to 60 inches: Low (about 4.4 inches) 16

Custom Soil Resource Report Interpretive groups Land capability classification (irrigated): None specified Land capability classification (nonirrigated): 2e Hydrologic Soil Group: C Ecological site: F144AY037MA - Moist Dense Till Uplands Hydric soil rating: No Description of Urban Land, Boonton Substratum Setting Landform: Ground moraines Landform position (three-dimensional): Lower third of mountainflank, upper third of mountainflank, center third of mountainflank Down-slope shape: Convex Across-slope shape: Linear Parent material: Surface covered by pavement, concrete, buildings, and other structures underlain by disturbed and natural soil material Typical profile H1 - 0 to 12 inches: material H2 - 12 to 47 inches: silt loam 2CBt1 - 47 to 58 inches: loamy sand 2CBt2 - 58 to 72 inches: loamy sand Interpretive groups Land capability classification (irrigated): None specified Land capability classification (nonirrigated): 8s Hydric soil rating: Unranked Minor Components Udorthents, boonton substratum Percent of map unit: 10 percent Landform: Ground moraines Landform position (three-dimensional): Lower third of mountainflank, upper third of mountainflank, center third of mountainflank Down-slope shape: Convex Across-slope shape: Linear Hydric soil rating: No URBONB—Urban land, Boonton substratum, 0 to 8 percent slopes Map Unit Setting National map unit symbol: w9cn Elevation: 50 to 500 feet Mean annual precipitation: 30 to 64 inches Mean annual air temperature: 46 to 79 degrees F Frost-free period: 131 to 178 days Farmland classification: Not prime farmland 17

Custom Soil Resource Report Map Unit Composition Urban land, boonton substratum: 90 percent Minor components: 10 percent Estimates are based on observations, descriptions, and transects of the mapunit. Description of Urban Land, Boonton Substratum Setting Landform: Ground moraines Landform position (three-dimensional): Lower third of mountainflank Down-slope shape: Linear, convex Across-slope shape: Linear Parent material: Surface covered by pavement, concrete, buildings, and other structures underlain by disturbed and natural soil material Typical profile H1 - 0 to 12 inches: material H2 - 12 to 47 inches: silt loam 2CBt1 - 47 to 58 inches: loamy sand 2CBt2 - 58 to 72 inches: loamy sand Interpretive groups Land capability classification (irrigated): None specified Land capability classification (nonirrigated): 8s Hydric soil rating: Unranked Minor Components Boonton Percent of map unit: 5 percent Landform: Ground moraines Landform position (three-dimensional): Upper third of mountainflank, center third of mountainflank Down-slope shape: Convex Across-slope shape: Linear Hydric soil rating: No Udorthents, boonton substratum Percent of map unit: 5 percent Landform: Ground moraines Landform position (three-dimensional): Lower third of mountainflank, upper third of mountainflank, center third of mountainflank Down-slope shape: Convex Across-slope shape: Linear Hydric soil rating: No 18

RUSLE2 Related Attributes---Essex County, New Jersey RUSLE2 Related Attributes This report summarizes those soil attributes used by the Revised Universal Soil Loss Equation Version 2 (RUSLE2) for the map units in the selected area. The report includes the map unit symbol, the component name, and the percent of the component in the map unit. Soil property data for each map unit component include the hydrologic soil group, erosion factor Kf for the surface horizon, erosion factor T, and the representative percentage of sand, silt, and clay in the mineral surface horizon. Missing surface data may indicate the presence of an organic layer. Report—RUSLE2 Related Attributes Soil properties and interpretations for erosion runoff calculations. The surface mineral horizon properties are displayed or the first mineral horizon below an organic surface horizon. Organic horizons are not displayed. RUSLE2 Related Attributes–Essex County, New Jersey Map symbol and soil name Pct. of Slope Hydrologic group Kf T factor Representative value map unit length (ft) % Sand % Silt % Clay BogB—Boonton loam, 3 to 8 percent slopes Boonton 80 492 C .32 3 46.1 43.8 10.1 Boonton, moderately well 10 492 C .32 3 46.1 43.8 10.1 drained Haledon 10 492 C .37 3 30.8 56.4 12.8 BogBc—Boonton loam, 0 to 8 percent slopes, extremely stony Boonton, extremely stony 85 492 C .32 3 46.1 43.8 10.1 Boonton, moderately well 10 492 C

oonton, extremely stony 85 492 C .32 3 46.1 43.8 10.1 Boonton, moderately well 10 492 C .32 3 46.1 43.8 10.1 drained, extremely stony Haledon, extremely stony 5 492 C .37 3 30.8 56.4 12.8 BouB—Boonton - Urban land, Boonton substratum complex, 0 to 8 percent slopes Boonton 50 492 C .32 4 46.1 43.8 10.1 Urban land, Boonton 40 656 — .49 — 30.9 53.6 15.5 substratum Udorthents, Boonton 10 492 D .28 5 46.0 44.0 10.0 substratum Natural Resources Web Soil Survey 8/4/2021 Conservation Service National Cooperative Soil Survey Page 1 of 2

RUSLE2 Related Attributes---Essex County, New Jersey RUSLE2 Related Attributes–Essex County, New Jersey Map symbol and soil name Pct. of Slope Hydrologic group Kf T factor Representative value map unit length (ft) % Sand % Silt % Clay URBONB—Urban land, Boonton substratum, 0 to 8 percent slopes Urban land, Boonton 90 656 — .49 — 30.9 53.6 15.5 substratum Boonton 5 492 C .32 4 46.1 43.8 10.1 Udorthents, Boonton 5 492 D .28 5 46.0 44.0 10.0 substratum Data Source Information Soil Survey Area: Essex County, New Jersey Survey Area Data: Version 16, Jun 1, 2020 Natural Resources Web Soil Survey 8/4/2021 Conservation Service National Cooperative Soil Survey Page 2 of 2