470 Eagle SWM OM 06 2024

Property/System Owner: MPB Realty, LLC – Lawrence BenBassett 301 Route 17 North, Suite 802 Rutherford, NJ 07070 (301) 613-7965 Design Engineer: Matthew J. Bersch, PE Dynamic Engineering Consultants, PC 1904 Main Street Lake Como, NJ 07719 (732) 974-0198 As previously mentioned, this manual, including any future revisions, must be recorded upon the deed of record of the property. III. Proposed Best Management Practices: A. Routine Inspection and maintenance of Stormwater Management Facilities All stormwater management facilities have been designed to control stormwater and reduce flooding and degradation of water quality. Without proper routine inspection and maintenance, the system may lose some or all of its capability to function to its full capacity. Lack of adequate maintenance at these facilities could lead to system failures. A consulting professional engineer should perform regularly scheduled maintenance inspections of the stormwater facilities at least twice each year. In addition to the regular scheduled inspections, inspections shall also occur after any major storm events. Major storm events are defined as storm events exceeding 1” of rainfall. The primary purpose of these inspections is to ascertain the operational condition and safety of the facilities, particularly the condition of embankments, outlet structure, rip rap and other safety-related aspects. Inspections will also provide information on the effectiveness of regularly scheduled Preventative and Aesthetic Maintenance Procedures, and will help to identify where changes in the extent and scheduling of the procedures are warranted. Finally, the facility inspections should also be used to determine the need for and timing of Corrective Maintenance procedures. Routine maintenance of this facility should be separated into two (2) basic types: Functional Maintenance and Aesthetic Maintenance. Functional Maintenance is further broken down into two Operation & Maintenance Manual 2 June

onal Maintenance and Aesthetic Maintenance. Functional Maintenance is further broken down into two Operation & Maintenance Manual 2 June 2024 DEC# 1021-99-025