Town CrierWest Orange, New Jersey
← Back to search

Supporting Documentation · May 6, 2026

13026 Resubmission

Preserved file SHA-2560e7392dd7d594406a7ef76abd40438d954e383491ee5ec94505f00a12f9db01d

Indexed text · page 16

Show all pages
Page 16

Project: 262-270 Main St Geotechnical Investigation Key to Log of Boring Project Location: 262-270 Main St, West Orange, NJ 07052 Sheet 1 of 1 Project Number: JMA02P003.06 Sampling Resistance, Sample Number Elevation (feet) Material Type Sample Type Graphic Log Depth (feet) blows/ft

Page 16

blows/ft MATERIAL DESCRIPTION REMARKS AND OTHER TESTS 1 2 3 4 5 6 7 8 9 COLUMN DESCRIPTIONS 1 Elevation (feet): Elevation (MSL, feet). 6 Material Type: Type of material encountered. 2 Depth (feet): Depth in feet below the ground surface. 7 Graphic Log: Graphic depiction of the subsurface material 3 Sample Type: Type of soil sample collected at the depth interval encountered. shown. 8 MATERIAL DESCRIPTION: Description of material encountered. 4 Sample Number: Sample identification number. May include consistency, moisture, color, and other descriptive 5 Sampling

Page 16

May include consistency, moisture, color, and other descriptive 5 Sampling Resistance, blows/ft: Number of blows to advance driven text. sampler one foot (or distance shown) beyond seating interval 9 REMARKS AND OTHER TESTS: Comments and observations using the hammer identified on the boring log. regarding drilling or sampling made by driller or field personnel. FIELD AND LABORATORY TEST ABBREVIATIONS CHEM: Chemical tests to assess corrosivity PI: Plasticity Index, percent COMP: Compaction test SA: Sieve analysis (percent passing No. 200 Sieve) CONS: One-dimensional consolidation test UC: Unconfined compressive strength test, Qu, in ksf LL: Liquid Limit, percent WA: Wash sieve (percent passing No. 200 Sieve) MATERIAL GRAPHIC SYMBOLS

Page 16

MATERIAL GRAPHIC SYMBOLS Cuttings SILT, SILT w/SAND, SANDY SILT (ML) Silty GRAVEL (GM) Silty SAND (SM) Poorly graded SAND with Silt (SP-SM) P:\02-PF\JMA02P003\JMA02P003.05\04-Reports\Geotech Report\Appendicies\Boring 1.bg4[(master 0 lab).tpl] TYPICAL SAMPLER GRAPHIC SYMBOLS OTHER GRAPHIC SYMBOLS Water level (at time of drilling, ATD) Auger sampler CME Sampler Pitcher Sample Water level (after waiting, AW) 2-inch-OD unlined

Page 16

2-inch-OD unlined split Bulk Sample Grab Sample Minor change in material properties within a spoon (SPT) stratum 3-inch-OD California w/ 2.5-inch-OD Modified Shelby Tube (Thin-walled, Inferred/gradational contact between strata brass rings California w/ brass liners fixed head) ? Queried contact between strata GENERAL NOTES 1: Soil classifications are based on the Unified Soil Classification System. Descriptions and stratum lines are interpretive, and actual lithologic changes may be gradual. Field descriptions may have

Page 16

nes are interpretive, and actual lithologic changes may be gradual. Field descriptions may have been modified to reflect results of lab tests. 2: Descriptions on these logs apply only at the specific boring locations and at the time the borings were advanced. They are not warranted to be representative of subsurface conditions at other locations or times. Figure B-1

File revisions (1)