13026 Resubmission

PART 11 - SUPPLEMENTARY GENERAL CONDITIONS FOR MECHANICAL AND ELECTRICAL TRADES CONSTRUCTION NOTES G. DRYWALL PART 9 - FINISHES (WHERE APPLICABLE) 1. EXPOSED GYPSUM BOARD: ASTMC36 A. GENERAL A. GENERAL CONDITIONS: ALL GENERAL CONDITIONS AS SET FORTH PREVIOUSLY ARE HEREBY MADE A 1. GENERAL: A. TYPE X WHERE INDICATED AND WHERE REQUIRED FOR FIRE-RESISTANCE RATING INDICATED. 1. SEE GENERAL CONDITIONS PART OF THIS SPECIFICATION. ALL WORK TO BE COMPLETED IN ACCORDANCE WITH THE 2021 INTERNATIONAL BUILDING B. LONG EDGES: STANDARD TAPER 2. THE CONTRACTOR SHALL PROVIDE ALL ITEMS, MATERIALS ETC. AS SHOWN OR NOTED ON THE CODE - NJ EDITION, AND REGULATIONS OF ALL OTHER AGENCIES HAVING JURISDICTION. C. THICKNESS: 5/8", OR AS SHOWN ON DRAWINGS. DRAWINGS OR DESCRIBED HEREIN, INCLUDING LABOR, EQUIPMENT ANY OTHER ITEMS REQUIRED B. MATERIALS AND WORKMANSHIP: ALL WORK SHALL BE PERFORMED BY COMPETENT MECHANICS, 2. TRIM ACCESSORIES FOR THE COMPLETE INSTALLATION OF ALL FINISHES. ACCORDING TO MANUFACTURERS' RECOMMENDATIONS AND IN ACCORDANCE WITH ACCEPTED GOOD 2. MEANS OF EGRESS: A. PROVIDE MANUFACTURER'S STANDARD METAL TRIM ACCESSORIES, OF THE BEADED TYPE WITH A. THE OWNER SHALL BE RESPONSIBLE FOR FINAL SELECTION OF ALL FINISH MATERIALS AND PRACTICE OF THE VARIOUS TRADES. ALL MATERIAL SHALL BE AS SPECIFIED OR PERFECT CONDITION. ALL MEANS OF EGRESS SHALL BE MAINTAINED CLEAR AND FREE OF ALL OBSTRUCTIONS, FACE FLANGES FOR CONCEALMENT IN JOINT COMPOUND EXCEPT WHERE SEMI-FINISHING OR COLORS. WHERE

ONS, FACE FLANGES FOR CONCEALMENT IN JOINT COMPOUND EXCEPT WHERE SEMI-FINISHING OR COLORS. WHERE PARTICULAR ITEMS OF MATERIAL ARE SPECIFIED, CONTRACTORS SHALL SUPPLY THE BEST SUCH AS BUILDING MATERIALS, TOOLS, ETC. EXPOSED TYPE LOCATIONS. QUALITY ITEMS. B. CORNER BEADS AT EXTERNAL CORNERS B. MATERIALS 3. FIRE SAFETY: C. EDGE TRIM OF THE SHAPE INDICATED WHERE EDGE OF GYPSUM BOARD WOULD OTHERWISE 1. RESILIENT FLOOR COVERINGS SHALL BE INSTALLED IN THE LOCATIONS AS SHOWN AND NOTED ON C. SLEEVES: CONTRACTOR FOR EACH TRADE SHALL FURNISH ALL GALVANIZED STEEL PIPE SLEEVES AS A. ALL BUILDING MATERIALS WHICH ARE STORED AT THE SITE OR ANY AREA OF THE 1123 BROADWAY, SUITE 302, NY, NY 10010 BE EXPOSED OR SEMI- EXPOSED: L-TYPE FOR TIGHT ABUTMENT AT EDGES, OTHERWISE U-TYPE THE DRAWINGS. REQUIRED BY HIS WORK. BUILDING ARE TO BE STORED IN A LOCKED AREA. ACCESS TO THE AREA TO BE PHONE 646.248.6664 AS NEEDED/ REQUIRED. A. RESILIENT FLOORING CONTRACTOR SHALL INSPECT ALL SUBFLOORING AND IMMEDIATELY CONTROLLED BY THE GENERAL CONTRACTOR OR HIS REPRESENTATIVE. WWW.JMAPC.COM D. CONTROL JOINT UNITS, OF METAL AT LOCATIONS RECOMMENDED BY THE MANUFACTURER. REPORT FINDINGS TO THE OWNER. D. CUTTING AND PATCHING: CONTRACTOR FOR EACH TRADE SHALL BE RESPONSIBLE FOR ALL CUTTING B. ALL MATERIALS TO BE STORED IN A ORDERLY FASHION. 3. CONCEALED ACOUSTICAL SEALANT:

D. CUTTING AND PATCHING: CONTRACTOR FOR EACH TRADE SHALL BE RESPONSIBLE FOR ALL CUTTING B. ALL MATERIALS TO BE STORED IN A ORDERLY FASHION. 3. CONCEALED ACOUSTICAL SEALANT: NON-SHRINKING, NON- DRYING, NON-MIGRATING, NON- B. ALL FLOOR COVERINGS SHALL CONFORM TO ALL APPLICABLE FEDERAL SPECIFICATIONS. AND PATCHING AS REQUIRED BY HIS WORK. C. ALL FLAMMABLE MATERIALS TO BE KEPT TIGHTLY SEALED IN THEIR RESPECTIVE STAINING, MASTIC. C. ALL MATERIALS SHALL BE NEW AND FREE FROM DEFECTS; BEST COMMERCIAL GRADE FOR MANUFACTURERS' CONTAINERS. SUCH MATERIALS ARE TO BE KEPT AWAY FROM HEAT. 4. EXPOSED ACOUSTICAL SEALANT: LATEX, ACRYLIC, OR ACRYLIC-LATEX TYPE, PERMANENTLY EACH SPECIFIC FUNCTION AND SITUATION. E. MEASUREMENTS TO BE VERIFIED: BEFORE ORDERING ANY MATERIALS OR COMMENCING WITH ANY D. ALL FLAMMABLE MATERIALS TO BE USED AND STORED IN AN ADEQUATELY VENTILATED ELASTIC AND PAINTABLE. D. ALL PRIMERS AND ADHESIVES SHALL BE COMPATIBLE WITH FLOOR FINISH AS RECOMMENDED WORK, THE CONTRACTORS SHALL VERIFY ALL MEASUREMENTS AND CONDITIONS AT THE SITE AND SPACE. 5. JOINT TAPE: ASTM C475, PERFORATED BY THE MANUFACTURER. SHALL ASCERTAIN THE CORRECTNESS OF SAME. NO EXTRA CHANGE OR COMPENSATION WILL BE E. ALL ELECTRICAL POWER TO BE SHUT OFF WHERE THERE ARE EXPOSED CONDUITS. ARCHITECT: 6. JOINT COMPOUND: ASTM C 475, OF THE TYPE INDICATED. PROVIDE READY-MIXED VINYL-TYPE FOR E. VINYL BASES SHALL BE THE COVE TYPE AND SHALL BE .085" X 4" MOLDED VINYL. ALLOWED ON ACCOUNT OF DIFFERENCES BETWEEN ACTUAL DIMENSIONS / JOB CONDITIONS AND F. ALL ELECTRICAL POWER IN THE CONSTRUCTION AREA TO BE SHUT OFF AFTER INTERIOR WORK. PROVIDE 2 SEPARATE GRADES OF COMPOUND: ONE SPECIFICALLY FOR BEDDING 2. CERAMIC

S AND F. ALL ELECTRICAL POWER IN THE CONSTRUCTION AREA TO BE SHUT OFF AFTER INTERIOR WORK. PROVIDE 2 SEPARATE GRADES OF COMPOUND: ONE SPECIFICALLY FOR BEDDING 2. CERAMIC TILE (WHERE/ IF APPLICABLE ) THOSE INDICATED ON THE DRAWINGS. WORKING HOURS. JORGE E. MASTROPIETRO TAPE AND ONE FOR TOPPING. A. INSTALL CERAMIC TILE WHERE SHOWN ON THE PLANS AND IN ACCORDANCE WITH ALL G. CONTRACTOR, AT ALL TIMES, IS TO ENSURE THERE IS NO NATURAL GAS LEAKAGE IN NY LICENSE NO. 036208-1 7. INSTALLATION SHALL BE PERFORMED ONLY BY AN APPLICATOR EXPERIENCED IN USING THIS MANUFACTURES REQUIREMENTS AND ANSI STANDARDS. F. EXAMINATION OF DOCUMENTS, BUILDING AND SITE: THE BIDDERS ARE REQUIRED TO EXAMINE THE THE BUILDING, OR ANY FLAMMABLE GAS TO BE USED DURING CONSTRUCTION. PRODUCT AND SHALL USE TOOLS AND EQUIPMENT APPROVED BY THE MANUFACTURER. B. COLORS AND PATTERNS BY ARCHITECT/ OWNER. BUILDING AND SITE OF THE WORK AND TO EXAMINE AND BECOME FAMILIAR WITH PLANS, 8. INSTALL GYPSUM BOARDS IN LENGTHS AND DIRECTIONS WHICH WILL MINIMIZE NUMBER OF END C. CERAMIC TILES SHALL BE IN THE SHAPES AND SIZES AS SPECIFIED IN ELEVATIONS SPECIFICATIONS AND ALL OTHER CONTRACT DOCUMENTS PERTAINING TO THE PROPOSED WORK. 4. DUST CONTROL: JENNIFER PALERMO JOINTS, AND AVOID END JOINTS IN CENTRAL AREA OF CEILINGS. I. FURNISH COMBINATION COVE AND BASE COMPLETE WITH COMBINATION ANGLES AND SUBMISSION OF A BID SHALL BE SUFFICIENT TO ESTABLISH THE PRESUMPTION THAT THE BIDDER HAS DEBRIS, DIRT, AND DUST TO BE CLEANED UP AND CLEARED FROM THE BUILDING SITE NJ LICENSE NO. AI 015932 9. INSTALL WALLS AND PARTITIONS WITH EXPOSED GYPSUM BOARDS VERTICAL, WITH JOINTS STRETCHER SHAPES FOR

ANED UP AND CLEARED FROM THE BUILDING SITE NJ LICENSE NO. AI 015932 9. INSTALL WALLS AND PARTITIONS WITH EXPOSED GYPSUM BOARDS VERTICAL, WITH JOINTS STRETCHER SHAPES FOR INTERNAL AND EXTERNAL CORNERS AND ANY OTHER SHAPES AND INVESTIGATED THE SITE OF WORK AND IS SATISFIED AS TO ALL CONDITIONS ENCOUNTERED, THE DAILY TO AVOID EXCESSIVE ACCUMULATION. OFFSET ON OPPOSITE SIDES OF PARTITIONS. OTHERWISE, INSTALL BOARDS AT RIGHT-ANGLES WITH ACCESSORIES AS REQUIRED FOR THE COMPLETE INSTALLATION OF CERAMIC TILE. CHARACTER, QUALITY AND QUANTITY OF THE WORK TO BE PERFORMED, AND THE MATERIALS SUPPORTS, EXCEPT WHERE RECOMMENDED IN A DIFFERENT ARRANGEMENT BY MANUFACTURER. 3. PAINTING FURNISHED IN COMPLETION THEREOF. 5. PROTECTION 10. FORM CONTROL JOINTS WITH 1/2" SPACE BETWEEN BOARDS. INSTALL ACOUSTICAL SEALANT AT ALL SURFACES TO BE PAINTED SHALL BE CLEAN, PROPERLY PREPARED IN ACCORDANCE WITH PAINT A. CONTRACTOR TO PROVIDE ADJOINING PROPERTY PROTECTION IN ACCORDANCE WITH PROJECT: BASE OF SPACE, AND APPLY TRIM ACCESSORY AT FACE. MANUFACTURES PRINTED INSTRUCTIONS. PROTECT ADJACENT SURFACES AS NECESSARY. CLEAN G. TEMPORARY LINES: CONTRACTORS SHALL MAINTAIN CONTINUITY OF ALL SERVICES WITHIN THE CODE REQUIREMENT (NJAC 5:23-2.15 (f)1.I(1) & 5:23-2.34). 11. ACOUSTICAL SEALANT: DEMISING WALLS TO BE "SOUND RETARDING" WITH AN STC RATING OF 45 ALL DRIPS AND SPATTERS. COLOR AND GLOSS OF INTERIOR SPACES SHALL BE SELECTED BY THE BUILDING OR SITE DURING THE COURSE OF CONSTRUCTION, PROVIDING TEMPORARY LINES AS B. CONSTRUCTOR SHALL TAKE EVERY APPROPRIATE PRECAUTION IN ACCORDANCE WITH 262-270 MAIN STREET MIN.: APPLY 2 SEPARATE BEADS OF ACOUSTICAL SEALANT ALL AROUND AT INTERRUPTIONS OF OWNER. EXTERIOR PAINT COLORS SELECTED BY OWNER AND APPROVED BY ARCHITECT. THE REQUIRED. CURRENT BUILDING CODES AND

IOR PAINT COLORS SELECTED BY OWNER AND APPROVED BY ARCHITECT. THE REQUIRED. CURRENT BUILDING CODES AND CONSTRUCTION PRACTICES TO ENSURE ADJOINING WEST ORANGE DRYWALL WORK AS RECOMMENDED BY THE MANUFACTURER. PAINTING AND FINISHING OF ALL INTERIOR AND EXTERIOR ITEMS AND SURFACES SHALL BE AS PROPERTIES ARE PROTECTED FROM DAMAGE DURING DEMOLITION AND CONSTRUCTION. ESSEX COUNTY, NJ 07052 12. FORM "FLOATING" CONSTRUCTION FOR GYPSUM BOARDS AT INTERNAL CORNERS, EXCEPT FOLLOWS: H. SUPPORTS: SUPPORTS FOR ALL MECHANICAL AND ELECTRICAL EQUIPMENT REQUIRING SAME SHALL C. BEFORE COMMENCE ANY WORK THE CONSTRUCTOR SHALL NOTIFY THE NEIGHBOURS WHERE SPECIAL ISOLATION OF EDGE TRIM IS INDICATED. A. EXTERIOR WOOD AND TRIM SHALL RECEIVE 1 COAT OF PRIMER AND 2 FINISH COATS OF ALKYD BE FURNISHED BY RESPECTIVE CONTRACTORS. ALL EQUIPMENT HUNG FROM OVERHEAD ON BOTH SIDES PRIOR TO COMMENCEMENT OF ANY WORK. BLOCK 114 LOT 50 & 55 13. ISOLATE DRYWALL WORK FROM ABUTTING STRUCTURAL AND MASONRY WORK; PROVIDE EDGE OIL ENAMEL. CONSTRUCTION SHALL HAVE WEIGHT OF EQUIPMENT DISTRIBUTED BY USE OF ANGLE OR CHANNELED TRIM AND ACOUSTICAL SEALANT AS RECOMMENDED BY THE MANUFACTURER. B. EXTERIOR AND INTERIOR FERROUS METAL SHALL BE PROPERLY PRIMED AND GIVEN 2 COATS FROM SUPPORTS AS NECESSARY AND APPROVED, WITH SAME SUBSTANTIALLY FASTENED TO 14. INSTALL WATER-RESISTANT BACKING BOARDS WHERE SHOWN TO RECEIVE TILE AND SIMILAR OF ALKYD ENAMEL.

FROM SUPPORTS AS NECESSARY AND APPROVED, WITH SAME SUBSTANTIALLY FASTENED TO 14. INSTALL WATER-RESISTANT BACKING BOARDS WHERE SHOWN TO RECEIVE TILE AND SIMILAR OF ALKYD ENAMEL. STRUCTURAL SUPPORT SYSTEM. ANY WALL-MOUNTED EQUIPMENT WHICH CANNOT BE SUPPORTED OWNER: RIGID APPLIED FINISHES. DO NOT APPLY TAPE AND COMPOUND AT JOINTS. SEAL CUT EDGE, JOINTS C. INTERIOR GYPSUM DRYWALL SHALL BE PROPERLY PRIMED AND GIVEN 1 COAT LATEX - SEE FROM ARCHITECTURAL OR STRUCTURAL MATERIALS, SHALL HAVE ITS OWN INDEPENDENT SUPPORT 262 MAIN STREET AND PENETRATIONS WITH WATER-RESISTANT SEALANT PRIOR TO INSTALLATION. FINISH SCHEDULE. SYSTEM FURNISHED BY THE CONTRACTOR. PROPER INSTALLATION METHOD SHALL BE AS APPROVED NJ IBC 2021 - SPECIAL INSPECTIONS REALTY LLC 15. SCREW GYPSUM BOARD TO SUPPORTS, JOINTS, STUDS, ETC. D. INTERIOR WOOD WORK, DOORS AND TRIM SHALL BE GIVEN 1 COAT SEMI-TRANSPARENT ALKYD- BY ARCHITECT. 16. EXCEPT AS OTHERWISE INDICATED, APPLY JOINT TAPE AND JOINT COMPOUND AT JOINTS (BOTH OIL STAIN AND 1 COAT POLYURETHANE BOTH SIDES, TOP AND BOTTOM. INSPECTION CODE 262-270 MAIN STREET DIRECTIONS) BETWEEN GYPSUM BOARDS. APPLY COMPOUND AT ACCESSORY FLANGES, E. INTERIOR EXPOSED CONCRETE FLOORS SHALL BE GIVEN 1 COAT OF CLEAR CONCRETE I. DAMAGED WORK: EACH CONTRACTOR SHALL PROTECT AND LEAVE IN PERFECT CONDITION ALL STEEL CONSTRUCTION IBC 1705.2 WEST ORANGE, NJ 07052 PENETRATIONS, FASTENER HEADS, AND SURFACE DEFECTS. SEALER-DUST PROOFING.

, NJ 07052 PENETRATIONS, FASTENER HEADS, AND SURFACE DEFECTS. SEALER-DUST PROOFING. MATERIALS, APPARATUS FITTINGS, FIXTURES AND TRIM IN THE SCOPE OF HIS CONTRACT. SHOULD ANY STRUCTURAL STEEL IBC 1705.2.1 646 427 9908 17. INSTALL COMPOUND IN 2 COATS (PLUS PREFILL OF CRACKS WHERE RECOMMENDED BY F. EXTERIOR STUCCO AND MASONRY SHALL BE GIVEN 2 COATS OF OIL BASED ENAMEL. ITEMS BE DAMAGED OR BROKEN, OR WORKMANSHIP MOLESTED, NO MATTER BY WHOM SUCH DAMAGE MANUFACTURER); SAND AFTER LAST COAT. G. PAINTS SHALL BE MANUFACTURED BY ONE OF THE FOLLOWING: BENJAMIN MOORE PAINTS CON- IS CAUSED, THE WORK MUST BE CORRECTED AND DAMAGED ITEMS REPLACED WITH NEW ITEMS, BY COLD FORMED STEEL DECK IBC 1705.2.2 18. APPLY SINGLE COAT USG IMPERIAL FINISH PLASTER, OR APPROVED EQUIVALENT, SMOOTH- LUX PAINT CO. OR EQUAL THE CONTRACTOR AT NO ADDITIONAL COST TO THE OWNER. ANY WORK WHICH NEEDS REDOING OPEN WEB STEEL JOIST GRIDERS IBC 1705.2.3 CONSULTANTS: TROWEL FINISH. BECAUSE CONTRACTORS RELATIVE TO DAMAGE SHALL BE DONE BY THE SKILLED TRADE WHICH COLD FORMED STEEL TRUSSES SPANING 60' OR GREATER IBC 1705.2.4 19. GENERAL STANDARD: GYPSUM ASSOCIATION SPECIFICATION GA-216, AND MANUFACTURER'S C. INSTALLATION ORIGINALLY PERFORMED SUCH WORK. ANY ADJUSTMENTS BETWEEN CONTRACTORS RELATIVE TO

TRAFFIC ENGINEER CONCRETE CONSTRUCTION IBC 1705.3 INSTRUCTIONS (WHICHEVER IS MORE STRINGENT). 1. ALL MATERIALS IN THIS SECTION SHALL BE INSTALLED IN THE MOST PROFESSIONAL AND DAMAGE TO WORK OR MATERIALS, SHALL NOT BE THE RESPONSIBILITY OF THE OWNER, ARCHITECT, WELDING OF REINFORCING BARS IBC 1705.3.1 DOLAN&DEAN 20. MATERIALS (USG OR APPROVED EQUAL) WORKMANLIKE MANNER, IN STRICT ACCORDANCE WITH THE MANUFACTURERS WRITTEN ENGINEER OR THEIR REPRESENTATIVES. MATERIAL TESTS IBC 1705.3.2 CONSULTING ENGINEERS, LLC INSTRUCTION AND ALL APPLICABLE CODES AND STANDARDS. 181 WEST HIGH STREET H. GUARANTEES:

181 WEST HIGH STREET H. GUARANTEES: 2. INSTALL ALL ACCESSORIES, TRIM PIECES, ETC. AS REQUIRED FOR THE COMPLETE INSTALLATION J. CHARTS AND TAGS: ALL VALVES, DAMPERS, CONTROLS SHALL BE DESIGNED BY DISTINGUISHING MASONRY CONSTRUCTION IBC 1705.4 1. MATERIALS: THE CONTRACTOR SHALL FURNISH TO THE OWNER A 5 YEAR WRITTEN GUARANTEE OF EACH FINISH MATERIAL. NUMBERS AND/OR LETTERS ON REQUIRED CHARTS AND/OR DIAGRAMS. THE CONTRACTOR SHALL GLASS UNIT MASONRY AND MASONRY VENEER IN RISK CATEGORY IV IBC 1705.4.1 SOMERVILLE, NJ 08876 ON ALL MATERIALS FURNISHED BY THOSE TRADES AS LISTED IN THIS SECTION TO BE FREE FROM 3. ALL MATERIALS SHALL BE ACCURATELY SCRIBED TO FIT PIPES, COLUMNS, AND ALL OTHER INSTALL APPROVED TAGS FOR ALL DESIGNATED ITEMS, WITH NUMBERS AND/OR LETTERS ON THE TAGS VERTICAL MASONRY FOUNDATION ELEMENTS IBC 1705.4.2 908 927 0100 DEFECTS DUE TO FAULTY WORKMANSHIP AND / OR MATERIALS. ALL DEFECTIVE MATERIAL SHALL BE FEATURES AND SHALL BE NEATLY CUT AND BUTTED TO ALL WALLS BASES, ETC. CORRESPONDING TO THOSE ON THE CHARTS AND/OR DIAGRAMS. SOILS IBC 1705.6 REPLACED AS REQUIRED IMMEDIATELY AFTER PROPER NOTICE, AT NO COST TO THE OWNER. 4. CERAMIC TILES SHALL BE SET PLUMB LEVEL AND TRUE TO LINE, ALL JOINTS SHALL BE UNIFORM; STRUCTURAL ENGINEER DRIVEN DEEP FOUNDATIONS IBC 1705.7 HUDSON ENGINEERING, LLC.