07172026_PB 26 02 27 Fairway Drive Planning Review 1

Memorandum Page 5 of 8 Accessory Structure Setback Not within front or side yard Shed: 0.42 ft N/A Shed: 0.42 ft (ENC) N/A >15 ft from principal building Shed: approx. 27 ft from principal building N/A Shed: approx. 27 ft from principal building N/A Accessory Structure Height <15 ft Unknown N/A Applicant to confirm N/A V = Variance Required ENC = Existing Non-Conforming Condition 5. Planning Review a. Building Height: Building height is not provided for the existing or proposed structures. Applicant to provide height of existing and proposed structures, including the principal and accessory structures, in order to assess compliance with bulk requirements. b. Side Yard Setback: The minimum side yard setback for lot 6.03 is obscured on the Plot Plan. Applicant to confirm minimum side yard setback. c. Parking: As per § 25-12.2a1, a parking requirement of 2.5 spaces is applied since the number of bedrooms is not specified. The dimensions of the proposed two-car garage are not provided; therefore, the number of spaces provided cannot be confirmed. Applicant to provide number of bedrooms for each dwelling and the dimensions of the garage. d. Subdivision Filing: Applicant to confirm if the subdivision is to be filed by deed. e. Walls and Fences: i. The height of the existing-to-remain fence on the side and rear property lines is not provided. Solid fences are permitted in the side and rear yards as long as they are less than 6 feet in height. Applicant to provide height of existing fencing to confirm compliance with the requirements in § 25-8.4. ii. Applicant to confirm if any fencing is proposed in the front yard, and if so, shall provide the height, material, and transparency. iii. Modular block walls are proposed in the side yards at a maximum height of 4 ft. This complies with the maximum height requirement.