13 Porter Site Plan Updated rcd 9 1 2026

2'-0 FELT D &W 156 X 1.00

IEL NAIL SLOTS WOOD SH 3/4" WOOD ICE

ICE FELT OVER DRIP INSTALLED PER NAIL SLOTS CENTER-LINE WOOD FRAMING FRAMING EDGE AT EAVE MANUFACTURER'S FRAMING 156 X 1.00 TOP LAP SPECIFICATION NAIL SLOTS NAILS

NAIL SLOTS NAILS ROOF FRAMING 24" BEYOND CEMENT LOCATED WOOD ( AS PER PLANS) INTERIOR WALL LINE UNDER EACH TAB FRAMING FOAM 2" END LAP VALLEY CONSTRUCTION: CLOSED- CUT VALLEY

VALLEY CONSTRUCTION: CLOSED- CUT VALLEY FOAM 235# SELF 5/16" CDX PLYSCORE DRIP EDGE FASTENERS A CLOSED CUT VALLEY CAN BE USED AS AN ALTERNATIVE AND IS SEAL SHINGLES AS OR GOLD BOND . OVER FELT MIN APPLIED AS FOLLOWS: FOAM AT RAKE EDGE FOAM SELECTED BY OSB LAY A 36" WIDE VALLEY LINER OF SELF-ADHERED MEMBRANE

LAY A 36" WIDE VALLEY LINER OF SELF-ADHERED MEMBRANE OWNER PANEL SHEATHING UNDERLAYMENT STANDARD SLOPE: WALL LINE HIP & RIDGE APPLICATION: UNDERLAYMENT OR EQUIVALENT. A 36" WIDE MIN. 50-LB. SMOOTH SURFACE ROOL ROOFING CAN ALSO BE USED AS AVALLEY LINER. 15# FELT LEAVE 1/8" GAP @ ENDS

LEAVE 1/8" GAP @ ENDS & EDGES. (TYP.) ROOF PLAN LAY ALL SHINGLES ON ONE SIDE OF VALLEY AND ACROSS CENTER LINE STANDARD SLOPE (4" IN 12" OR MORE) USE HIGH RIDGE HIP & RIDGE SHINGLES. FOLLOW OF VALLEY A MIN. OF 12". FASTEN A MIN. OF 6" AWAY FROM CENTER APPLICATION OF UNDERLAYMENT AND METAL DRIP EDGE. APPLICATION INSTRUCTIONS AS PRINTED ON THE HIGHT LINE EACH SIDE OF VALLEY. SPACIALITY EAVE FLASHING: RIDGE HIP & RIDGE DRAWING.

SPACIALITY EAVE FLASHING: RIDGE HIP & RIDGE DRAWING. STRIKE A CHALK LINE 2" FROM THE CENTER LINE OF THE UNSHINGLED SIDE. APPLY SHINGLES ON THE UNSHINGLES WEATHER LOCK UNDERLAYMENT OR EQUIVALENT EAVE AND FLASHING MEMBRANE APPLIED TO A POINT AT LEAST 24" SIDE UP TO THE CHALK LINE AND TRIM, TAKING CARE NOT TO CUT THE TYP. VINYL SIDING STRUCTURAL ROOF SHEATHING BEYOND INTERIOR WALL LINE. SEE MANUFACTURER'S UNDERLYING SHINGLES. CLIP UPPER CORNERS OF THERE SHINGLES, Drawn By: AJG Checked By: FC3 INSTALLATION INSTRUCTIONS WHERE REQUIRED BY ROOFING DETAILS CEMENT AND FASTEN.

CEMENT AND FASTEN. INSULATED VINYL SIDING N.T.S. CODE. 24" BEYOND INTERIOR WALL LINE 5 BOTH WOVEN AND METAL VALLEYS ARE ACCEPTABLE ALTERNATIVES. DOUBLE DUTCH LAP ISOMETRIC NTS ROOF DETAILS A-102 26-052 A-102 3 3/8" = 1'-0" 1

" = 1'-0" 1 As indicated 26-052 08-31-2026 © F E D C B A