242-22 Attachment - RFP Ginny Duenkel Underwater Lighting Improvements.pdf

IntelliBrite® Underwater Pool and Spa White LED Light Overview This manual describes how to installation and setup the IntelliBrite underwater pool and spa white LED (light-emitting diode) light. The IntelliBrite pool and spa light provides brilliant white light for spectacular effects for your pool and spa. The unique IntelliBrite lens geometry provides a wider beam for greater underwater light reflection providing increased light intensity. IntelliBrite LED lights are fully compatible with Pentair Water Pool and Spa® IntelliTouch®, EasyTouch® and SunTouch® automation system. For more information refer to the IntelliTouch User's Guide (P/N 520102), EasyTouch User's Guide (P/N 520584), and SunTouch User's Guide (P/N 520785). Operating IntelliBrite White Pool or Spa LED lights The IntelliBrite pool and spa white LED lights can be manually controlled using a standard wall-mount light switch. Multiple IntelliBrite lights can be connected via a junction box to a single switch so that all lights can be switched on and off together. Using an External Transformer for Multiple IntelliBrite 12 VAC Lights When using multiple IntelliBrite 12 VAC LED lights on a 300 Watt transformer, it is recommended that no more than two (2) IntelliBrite pool lights and one (1) IntelliBrite Spa light be used. It is also recommended not to exceed 100 feet of total cable run between the transformer and light (see diagram below). 300 Watt Transformer |" 45 Gauge (minimum) | 100 ft. J Box If a longer cable run is necessary, it is recommended that separate 100 Watt transformers be used for each light with no more than 200 feet of total cable run between the transformer and light (see diagram below). 100 Watt Transformer J Box 12 Gauge (minimum) } 200 ft. | IntelliBrite® Pool and Spa White LED Light Installation and User’s Guide