242-22 Attachment - RFP Ginny Duenkel Underwater Lighting Improvements.pdf

Never operate this underwater light for more than ten (10) seconds unless It is totally submerged in water. Without total submersion, the light assembly will get extremely hot, which may result in serious burns or in breakage of the lens. This may result in serious injury to pool users, installers, or bystanders, or in damage to property. 5. Install the IntelliBrite light assembly into the niche and tighten the special bronze pilot screw. Use only the special pilot screw provided with this underwater light. This screw mounts and electrically grounds the housing securely to the mounting ring and wet niche. Failure to use the screw provided could create an electrical hazard which could result in death or serious injury to pool users, installers or others due to electrical shock. Pilot screw Pilot screw IntelliBrite Pool White LED Light IntelliBrite Spa White LED Light 6. Fill the pool until the underwater light is completely submerged in water before operating the light for more than ten (10) seconds. 7. Final check for proper light operation: To check for proper operation, switch on the main switch or circuit breaker, and the switch that operates the IntelliBrite underwater light itself. The light should illuminate when Power is applied. If not recheck the installation steps starting with Step 1 (page 3) FOR INTELLIBRITE POOL AND SPA WHITE LED LIGHT REMOVAL AND INSTALLATION INSTRUCTIONS SEE: ¢ IntelliBrite Pool White LED Light Removal and Installation instructions, on page 5. ¢ IntelliBrite Spa White LED Light Removal and Installation instructions, on page 11. IntelliBrite® Pool and Spa White LED Light Installation and User's Guide