242-22 Attachment - RFP Ginny Duenkel Underwater Lighting Improvements.pdf

4. Using a %" nut driver and a #3 Phillips screwdriver, remove the nut uni- tension wire clamp. Place the nut aside for reinstallation. 5. Remove the face ring and wire clamp from the light housing. Spring clamp: Remove nut and screw 6. With the light resting on its base, carefully pry off the gasket to remove the lens. Discard the gasket. A NEW LENS GASKET (P/N 79101600) MUST BE USED EACH TIME THE LIGHT IS REASSEMBLED. See page 10 for replacement kit part numbers. Light housing Face ring Gasket and lens 7. Using a %" nut driver, carefully remove the four retainer nuts from the LED light assembly. Place the nuts aside for reinstallation. 8. Unplug the LED light assembly connector and remove the assembly from the housing. Ret ig nut (4x) Unplug the LED light assembly connector to remove the light assembly =} from its housing IntelliBrite® Pool and Spa White LED Light Installation and User’s Guide |