242-22 Attachment - RFP Ginny Duenkel Underwater Lighting Improvements.pdf

W Replacing the IntelliBrite Spa White LED Light Face ring and Gasket (P/N 640045) or Gasket and Lens (640046) see page 15 Note: When replacing an IntelliBrite Spa White LED light assembly, a new spa light assembly includes a light engine, lens, gasket and face ring (for part light assembly part numbers, see page ii). ADANGER DANGER ns ° RISK OF ELECTRICAL SHOCK OR ELECTROCUTION Always disconnect power to the pool light at the circuit breaker before servicing the light. Failure to do so could result in death or serious injury to installer, pool professional, pool users, or others due to electrical shock. 1. Turn off main electrical switch or circuit breaker, as well as the switch | which operates the IntelliBrite LED underwater light itself. [Awarning] Replace the LED light assembly with the same type and wattage. Failure to replace the LED light assembly with the same type will damage the LED light assembly and may cause an electrical hazard resulting in death or serious injury to pool users, installers, or others due to electrical shock, and may also cause damage to property. Always install a new lens gasket (see page 15 for kit part [AWARNING] numbers) whenever disassembling the IntelliBrite LED light assembly. Failure to do so may permit water to leak into the assembly which could cause: (a) an electrical hazard resulting in death or serious injury to pool users, installers, or others due to electrical shock, or (b) breakage of the lens, which likewise could result in serious injury to pool users, installers, or bystanders, or in damage to property. Pilot screw = IntelliBrite Spa White LED Light 2, REMOVING THE INTELLIBRITE LED LIGHT: Remove the pilot screw at top of face ring, remove the light assembly from the niche. Place the assembly ‘on the deck. Note: It is not necessary to drain down the pool. Be sure to keep the pilot screw from the IntelliBrite LED . underwater light. This screw mounts and electrically grounds the housing securely to the mounting ring and wet niche. Failure to use the screw provided could create an electrical hazard which could result in death or serious injury to pool users, installers or others due to electrical shock. IntelliBrite® Pool and Spa White LED Light Installation and User's Guide