242-22 Attachment - RFP Ginny Duenkel Underwater Lighting Improvements.pdf

8. INSTALLING THE INTELLIBRITE SPA LED WHITE WITH NEW GASKET: Install a new gasket during reassembly of the IntelliBrite spa LED white light. A NEW LENS GASKET MUST BE USED EACH TIME THE LIGHT IS REASSEMBLED. 9. Install the new gasket onto the lens: a) With the light housing resting on its base, place the lens then the gasket on top of the light housing. b) Place the face ring on top of the gasket. Make sure that the lens and gasket are centered correctly on the light housing. ¢) Aligning the face ring and lens: Align the face ring and lens so that the letter “O” in the word “TOP" and the small arrow above it) on the surface of the lens points to the pilot screw hole on the face ring. d) Aligning the lens position with the LEDs: While looking through the front of the lens, slightly rotate the lens until the vertical lines on the lens are in focus with the four (5) rows of LEDs below. Pilot screw Align letter “O” in the word “TOP” on lens with pilot screw hole on face ring Align vertical line ‘on lens with rows of LEDs under lens IntelliBrite® Pool and Spa White LED Light Installation and User’s Guide