242-22 Attachment - RFP Ginny Duenkel Underwater Lighting Improvements.pdf

18 Never operate this underwater light for more than ten (10) seconds unless it is totally submerged in water. Without total submersion, the light assembly will get extremely hot, which may result in serious burns or in breakage of the lens. This may result in serious injury to pool users, installers, or bystanders, or in damage to property. 9. Install the IntelliBrite light assembly into the niche and tighten the special bronze pilot screw. Use only the special pilot screw provided with this underwater light. This screw mounts and electrically grounds the housing securely to the mounting ring and wet niche. Failure to use the screw provided could create an electrical hazard which could result in death or serious injury to pool users, installers or others due to electrical shock. Pilot screw Pilot screw IntelliBrite Pool White LED Light IntelliBrite Spa White LED Light 10. Fill the pool/spa until the IntelliBrite underwater LED light is completely submerged in water before operating the light for more than ten (10) seconds. Note: The light should never be powered on out of the water for more than 10 seconds. Switch on main switch or circuit breaker, as well as the switch which operates the underwater light itself to verify that the light is operating correctly. IntelliBrite® Pool and Spa White LED Light Installation and User’s Guide