294-22 Korwell PS-Proposals.pdf

SCE-P09989.021 October 27,2022 Task |: Records Research & Deed Plotting Analysis It is our Understanding that SCE will not be provided with a title report(s) of the lot in question. SCE will gather additional records information such as, but not limited to; record adjoining owner deeds, present owner deed, tax map(s}, filed map(s), copy of title search (if Township can provide), previous survey(s), and any other documents to assist in preparation of actual field instrument survey. This information will be analyzed and plotted in AutoCAD for verification of all mathematical courses and any possible gores or overlaps written in record title documents. Any/all record boundary lines and easements will be illustrated on the Survey. Task Il: Field Survey SCE's in-house survey crew personnel will be mobilized to the site and will utilize state- of-the-art survey equipment including, but not limited to GPS and robotic stations to conduct site survey of the property in question. Field Survey will include the measurement and field locating of all site improvements and any/all existing boundary evidence (iron pins, pipes, monuments, etc.) found on site. SCE will perform all work within New Jersey State Plane Coordinate System (NAD-83(2011) / NAVD-88). On-site and off-site utilities will be investigated as readily accessible based on the project site conditions. It is the responsibility of the Owner, prior to SCE mobilizing, to ensure all relevant utility structures can be opened and are clear of any debris to obtain necessary measurements within the structures. SCE will make a reasonable attempt to access each structure within the project limits during the field survey, and if any issues are encountered, they will be noted accordingly on the survey. Task Ill; Boundary & Topographic Survey Deliverable SCE will download all collected data and place in AutoCAD for preparation of mapping. The Boundary & Topographic Survey will be prepared and drafted at an appropriate scale showing all collected field data, including any/all improvements within project area, and found boundary evidence shown with its relationship to the actual boundary lines. Topography will be depicted at |-foot contour intervals with appropriate spot grade elevations. SCE will depict the location of underground utilities within the project area based on existing markout as well as the visible

icted at |-foot contour intervals with appropriate spot grade elevations. SCE will depict the location of underground utilities within the project area based on existing markout as well as the visible surface structures and review of previously available mapping provided to SCE. All available utility information shall be identified and noted at both surface and subsurface level. SCE will utilize AutoCAD Civil 3D design software to map and model the existing conditions of the site. The Boundary & Topographic Survey will be prepared in accordance with N.J.A.C. 13:40-5.1 “Land Surveyors; Preparation of Land Surveys”. Deliverable for this Boundary & Topographic Survey prepared at an appropriate scale to depict the site improvements. It should be noted that when Boundary Survey services are provided, the cost of the research and the subsequent field and office tasks assume that the available data is relatively accurate and error free. If is difficult to evaluate the accuracy of the data