98-24 Exhibits to the Agreement for the Operation of the Recycling Center - 2024.pdf

t the recycling center shall not be returned to the generator. Such materials shall be segregated and stored in a secure manner and shall be immediately reported to the N.J.D.E.P. Environmental Action Hotline at 1-877-927-6337. The owner/operator of the recycling center shall secure the name of the collector/hauler suspected of delivering such waste to the facility and related information surrounding the incident, if available, and shall make this information known to N.J.D.E.P. enforcement personnel. [N.J.A.C. 7:26A-3.5(e)] All revisions to the site plan and the approved documents which may be required as a result of the above, shall be submitted to this office for modification to this Approval. [N.J:A.C. 7:26A-3 .5(e)] A fire control plan for the recycling center shall be filed with and approved by the local fire official or other person of competent juridiction and shall be filed with the local municipal code enforcement officer prior to operating the recycling center and submitted to the Department upon receipt. [N.LAC. 7:26A-3.8(c)] Fire fighting and emergency procedures shall be posted, and shall include the telephone numbers of local fire, police, ambulance, and hospital facilities. If a fire occurs on-site, the facility shall immediately notify the local fire official and the N.I.D.E.P. Environmental Action Hotline at 1-877-927-6337, [N.J.A.C. 7:26A-3.5(e)] Page 1-7 of 1-10

NEW JERSEY SPORTS AND EXPOSITION AUTHORITY 132237 REC190002 Recycling Center - Multiple Classes -Renewal Requirements Report Subject Item: RCCG216219 - Class B and C Recycling Operations, General Requirements 61. 62, Pursuant to N.J.A.C. 7:26A-3.11(a), the holder of this general approval shall obtain prior approval from the Department for any increase in the design capacity of the facility. The facility shall submit a request to the Department, in writing, for the proposed increase and shall submit updated information pursuant to the requirements of N.J.A.C. 7:26A-3.2(a), 3.4, or 3.8, as applicable. The facility shall also provide written notice of the request to the solid waste or recycling coordinator of the applicable district. [N.J.A.C. 7:26A-3.5(e)] All processed material shall be stored separately from residues. [N.J.A.C. 7:26A-3 .5(e)] Subject Item: RCCG914256 - Class C Recyclable Material, Specific Requirements 63. 64, 65. 66. 67. 68. 69. 70. 71. 72. The recycling center may receive, store, process and transfer source separated leaves and grass clippings separately or in a commingled manner. [N.J.A.C. 7:26A-3.5(e)] Exclusive loads of grass clippings received shall be transferred on the same day of receipt to other recycling centers authorized to receive this material. Mixed loads of leaves and grass clippings shall be ground using the tub grinders by the end of the day of receipt and transferred within twenty four (24) hours of grinding to the other recycling centers authorized to receive this material. [N.J.A.C. 7:26A- 3.5(e)] Tf the incoming material contains grass, it shall be accepted only in areas of the site that are at least 1,000 feet from any areas of human use or occupancy, and processing of such material shall begin on the day of receipt. [N.J.A.C. 7:26A-4.5(a)6,7] The following source separated Class C recyclable materials may be received, stored, processed or transferred at this recycling center: Leaves and Grass Clippings. [N.J.A.C. 7:26A- 3.5(e)] Within 30 days of ceasing operation, all residuals and unprocessed Class C recyclable material shall be removed from the site and recycled or disposed, as appropriate, and the recycling center shall arrange for a final cleaning of any containers, equipment, machines, floors and recycling center surfaces in which Class C recyclable materials or residue was processed or

d the recycling center shall arrange for a final cleaning of any containers, equipment, machines, floors and recycling center surfaces in which Class C recyclable materials or residue was processed or stored. [N.J.A.C. 7:26A-4.5(a)11] Leaves and Grass Clippings shall be received only curing times when the recycling center operator or owner is present. [N.J.A.C. 7:26A-4.5(a)4] An update to the final closure plan as needed shall be submitted to the Department in writing at least 180 days prior to the proposed closure date for the recycling center. [N.J.A.C. 7:26A-4.5(a)13] The recycling center shall notify the Department in writing at least 60 days prior to the proposed closure date for the recycling center. [N.J.A.C. 7:26A-4.5(a)9] The recycling center shall publish a notice of closure in a newspaper of general circulation in the district where the recycling center is located and in districts or communities sending at least 25 percent of their yard trimmings to the recycling center. Such notice shall be published at least 30 days prior to closure. [N.J.A.C. 7:26-4.5(a)10] The Department shall determine that a recycling center is considered closed when all the requirements of the closure plan have been met. [N.J.A.C. 7:26A-4.5(a)12] Page [-8 of -10

NEW JERSEY SPORTS AND EXPOSITION AUTHORITY 132237 REC190002 Recycling Center - Multiple Classes -Renewal Requirements Report Subject Item: RCGG754474 - Class B Recyclable Materials, Specific Requirements 73. 74. 75. 76. 71. 2B. The following source separated Class B recyclable materials may be received, stored, transferred or processed at this recycling center: Tree Parts and Brush. [N.J.A.C. 7:26A- 3.5(e)] The recycling center may receive, store, process and transfer tree parts and brush separately or in a commingled mamner. [N.J.A.C. 7:26A-3.5(e)] Tree Parts and Brush from the storage areas shall be directed to the " Equipment Processing Areas" identified on the approved site plan for further processing using the tub grinders. [N.J.A.C. 7:26A- 3.5()] The recycling center is authorized to store processed and unprocessed materials in the designated storage areas with capacity limitations as shown on the approved site plan. The areas specifically designated for storage of processed materials and the corresponding maximum authorized capacities are as follows: - (1) Final Product Stockpiles Area - 25,000 Cubic Yards (CY) - (2) Final Product Storage - 30,000 CY The areas specifically designated for storage of unprocessed materials and the corresponding maximum authorized capacities are as follows: - (1) Grass/Mixed Yard Waste - 7,500 CY - (2) Grass/Mixed Yard Waste - 7,500 CY - (3) Unprocessed Material or Final Product Storage Area - 30,000 CY - (4) Tree Parts and Brush Area - 7,500 CY If at any time, the total amount of processed and unprocessed material stored onsite reaches the maximum authorized capacities shown on the approved site plan, the recycling center shall immediately cease receiving additional unprocessed material until the amount of processed and unprocessed material stored onsite falls below the total authorized storage capacity. Under such circumstance, arrangements shall be made to transfer processed material offsite. While transferring processed material offsite, any processed material stored in the unprocessed storage area shall be transferred first. [N.J.A.C. 7:26A- 3.5(€)] In the event that the processed material storage area(s) has reached its maximum authorized capacity, the permittee may temporarily store excess processed material in the unprocessed material storage area subject to availability of additional capacity

ea(s) has reached its maximum authorized capacity, the permittee may temporarily store excess processed material in the unprocessed material storage area subject to availability of additional capacity in that area, as long as processed and unprocessed material are separated by either a physical barrier or by maintaining at least eight (8) feet of aisle space between the piles. Under no circumstance shall the combined volume of processed and unprocessed material exceed that Area’s maximum authorized storage capacity. [N.J.A.C. T:26A- 3.9(b)] Unprocessed Class B recyclable material shall not remain on-site, in its unprocessed form, for more than one (1) year. [N.J.A.C. 7:26A- 3.9(b)] Page I-9 of I-10

NEW JERSEY SPORTS AND EXPOSITION AUTHORITY 132237 REC190002 Recycling Center - Multiple Classes -Renewal Requirements Report Subject Item: RCGG754474 - Class B Recyclable Materials, Specific Requirements 79. Pursuant to N.J.A.C. 7:26 A — 3.2(a) 18, the holder of the general approval shall ensure that all recycling activities authorized by this general approval are conducted in full compliance with the applicable Storm Water Management rules at N.J.A.C. 7:8-5 and 6 and the Pollutant Discharge Elimination System rules at N.J.A.C. 7:14A-24 and 25. In the event that compliance with the above mules require changes to the site plan or any operations authorized by this general approval, the holder of the general approval shall submit a modification application including a revised site plan within thirty (30) days of receiving all approvals/permits from the Department’s Division of Water Quality to the Bureau of Recycling & Hazardous Waste Management for review and approval. [N.J.A.C. 7:26A- 3.5(e)] Page I-10 of I-10

State of Net Jersey DEPARTMENT OF ENVIRONMENTAL PROTECTION FRIED MORPHY Division of Solid & Hazardous Waste CATHERINE R. McCABE rae Bureau of Recycling & Hazardous Waste Management Commissioner SHEILA Y, OLIVER 401 E. State Street Lt. Governor PO Box 420, Mail Cade 401-02C : Trenton, New Jersey 08625 Tel: (609) 984-3438 Fax: (609) 777-195 1/984-0565 www.nj.gov/dep/dshw/recycling RECYCLING CENTER GENERAL APPROVAL FOR CLASS B RECYCLABLE MATERIALS Under the provisions of N.J.S.A. 13:1E-1 et seg. and N.JS.A. 13:1B-99.11 et seq., known as the Solid Waste Management Act and New Jersey Statewide Mandatory Source Separation and Recycling Act, respectively, and pursuant to NJ.A.C. 7:26A-1 ef seq., known as the Recycling Regulations, this approval is hereby issued to: RELIABLE WOOD PRODUCTS, LLC Facility Type: Class B Recycling Facility Block & Lot Nos: Block 16005, Lot 6 Municipality: Township of Sparta County: Sussex Facility ID No.: 132685 Permit No.: CBG190002 This General Approval is subject to compliance with all conditions specified herein and all regulations prornulgated by the Department of Environmental Protection (Department). This General Approval shall not prejudice any claim the State may have to riparian land nor does it allow the registrant to fill or alter, or allow to be filled or altered, in any way, lands that are deemed to be riparian, wetlands, stream encroachment or flood plains, or within the Coastal Area Facility Review Act (CAFRA) zone or are subject to the Pinelands Protection Act of 1979, nor shall it allow the discharge of pollutants to waters of this State without prior acquisition of the necessary grants, permits, or approvals from the Department. December 27, 2019 vee Liow Reissuance Date Karen Kloo, Chief Bureau of Recycling and Hazardous Waste Management December 27, 2024 Expiration Date

Reliable Wood Products Class B Recycling Center General Approval Page 2 of 3 Scope of Approval This General Approval (approval), along with the referenced application documents herein specified, shall constitute the sole approval of Recycling Center operations for Class B Recyclable Material (concrete, brick, block, asphalt, brush, tree stumps, tree parts and unpainted and non- chemically treated wood) storage and process center by Reliable Wood Products, LLC Reliable Wood Products) located in the Township of Sparta, Sussex County, New J ersey. Any registration, approval or permit previously issued by the Division of Solid and Hazardous Waste, or its predecessor agencies, for the specific activities as described below and as conditioned herein, is hereby superseded. Regulated Activities at the Facility Conditions 1 through 40 of this approval contain the general conditions applicable to all recycling centers, Conditions 41 through 65 of this approval contain general operation requirements for all recycling centers that receive, store, process, or transfer Class.B recycling materials and specific conditions applicable to the operations of the recycling center. Facility Description The facility is a Class B Recycling center operated by Reliable Wood Products for the recycling of source separated concrete, brick, block, asphalt, brush, tree stumps, tree parts, and wood material (unpainted and non-chemically treated). The tecycling center is located at 506 House’s Comer Road on Block 16005, Lot 6, in the Township of Sparta, Sussex County. This regional recycling center receives concrete, brick, block, asphalt, brush, tree stumps, tree parts, and wood (unpainted and non-chemically treated) from construction and demolition contractors, construction companies, municipalities and counties. The recycling center is authorized to accept and process asphalt, concrete, brick, block, brush, tree stumps, and tree parts, and wood (unpainted and non-chemically treated) from 7:00 a.m. to 5:00 p.m. Monday through Friday and 7:00 am. to 3:00 p.m. Saturday. Additionally, Reliable Wood Products, LLC may receive, manufacture, process, store and sell wood mulch, colored mulch and soil on site. Approved General Approval Application and Associated Documents The holder of this General Approval shall construct and operate the facility in accordance with NJAC. 7:26A-1 ef seq.,

nd soil on site. Approved General Approval Application and Associated Documents The holder of this General Approval shall construct and operate the facility in accordance with NJAC. 7:26A-1 ef seq., the conditions of this Approval and the following documents: a) Inclusion of Grinnell Recycling, Inc. in the District Solid Waste Management Plan (Plan) by the Sussex County, certified by the NJDEP Commissioner on November 9, 2000, and subsequent amendment to the Plan dated August 9, 2019 for transfer of Class B General Approval from Grinnell Recycling, Inc. to Reliable Wood Products, LLC. b) Site Plan- prepared by Dykstra Associates, signed and sealed by Douwe Dykstra, P.E., dated April 11, 2013 and last revised December19, 2013. ©) Grinnell Recycling, Inc. - Application for a Class B Recycling Center General Approval, dated January 17, 1995, prepared by PMK Group.

Reliable Wood Products Class B Recycling Center General Approval Page 3 of 3 qd) ¢) 8) h) d % m) n) Application for modification of Class B Recycling Center General Approval, dated June 4, 2001 and prepared by PMK Group. Request for renewal of Class B Recycling Center General Approval, dated April 15, 2005 and signed by Jason N. Cofrancesco, Owner, Grinnell Recycling, Inc, Supplemental information dated July 25, 2005, prepared by Richard M. Cestone, P.E., PMK Group and submitted in response to the Department’s Notice of Deficiency letter dated May - 25, 2005. Request for modification of Class B Recycling Center General Approval Modification request, prepared and signed by Christopher L. Daul, Vice President, Alman Group LLC, dated September 15, 2009. Request for renewal of Class B Recycling Center General Approval, dated June 16, 2010 and signed by Jason N. Cofrancesco. Management Agreement between Grinnell Recycling, Inc. and Harvest Garden State, LLC, dated June 11, 2013, prepared and signed by Eugene Ciarkowski, Vice President, Reliable Wood Products, LLC. Revised Modification Request dated January 6, 2014, prepared and signed by Steve Schkolenko, Grinnell Recycling, Inc. Administrative Consent Order between Grimnell Recycling, Inc. and the Department, dated. November 17, 2017. Request for transfer of ownership of the Class B Recycling Center from Grinnell Recycling, Inc. to Reliable Wood Product, LLC, dated November 8, 2018 and signed and certified by Eugene J. Cirakowski, Vice President, Reliable Wood Product, LLC. Agreement for Transfer of Class B Recycling Center General Approval, dated November 14, 2019, signed by Eugene Ciarkowski of Reliable Wood Products and Jason Confrancesco of Grinnell. Request for renewal (with no changes) of the Class B General Approval, dated December 17, 2018 and signed by Eugene Ciarkowski, Vice President, Reliable Wood Products. In case of conflict, the provisions of N.J.A.C. 7:26A-1 et seq. shall have precedence over the conditions of this Approval, and the conditions of this Approval shall have precedence over plans and specifications listed above.