181-26 Exhibit A- Final Specifications_compressed.pdf

108.02 COMMENCEMENT OF WORK THIS SUBSECTION IS DELETED IN ITS ENTIRETY AND REPLACED BY THE FOLLOWING: Refer to CONTRACT AND AGREEMENT Section in the front end of these specification regarding commencement of work. 108.05.02 Safety Program PART 3 IS CHANGED TO: 3. Elements of the Program. Include information and procedures for the following elements: a. Chain of Command. Include the responsibilities of the management, supervisor, safety officer, and employees. b. Traffic Control Coordinator. Include the name and contact information. Ensure that the traffic control coordinator meets the requirements specified in 159.03.01. c. Environmental Manager. Include the name and contact information. Ensure that the environmental manager meets the requirements specified in 158.03.01. d. Local Emergency Telephone Numbers. Include police, fire, medical, and, NJDEP hotline 1-877-WARN DEP (1-877-927-6337). e. Procedures for Handling Emergencies. Provide guidelines for handling emergencies, including emergency action plans for accidents involving death or serious injury, property damage, fires, explosions, and severe weather. Include the emergency contact information of the Contractor’s personnel responsible for handling emergencies. f. Training Topics. Include regulatory and jobsite toolbox meetings. Include the documentation from the training and an attendance sheet for each. g. Contractor’s Safety Rules. Include housekeeping procedures and personal protective equipment requirements. h. Employee Disciplinary Policy. Include the violation forms. i. Safety Checklists. Include project safety-planning, emergency plans and procedures, documentation, and protective materials and equipment. j. Forms. Include OSHA 300 Log and New Jersey Department of Labor L&I-1. k. Security Policy Guidelines. Provide a copy for the office and for the Project Limits. l. Hazard Communication Program. Provide the following: 1. The location of and instructions for understanding the MSDS. Ensure that the location and instruction are available to anyone within the Project

de the following: 1. The location of and instructions for understanding the MSDS. Ensure that the location and instruction are available to anyone within the Project Limits. 2. The person responsible for the hazard communication program and the method of informing personnel of the hazardous communication program. Include attendance sheets of hazard communication meetings. 3. When performing work that generates airborne crystalline silica, include engineering and work practice controls to limit exposure levels to at or below the permissible exposure limit according to 29 CFR 1910.1000 Table Z-3. Ensure that the program includes employee training and respiratory protection measures according to 29 CFR 1910.134 and control of the area when the permissible exposure limit is exceeded. Provide a trained and competent person, according to 29 CFR 1926.30, within the Project Limits at all times when performing work that produces airborne crystalline silica. m. Additional Requirements. Provide additional procedures for Project specific topics including: 1. Compressed gas cylinders. 2. Confined spaces. HELEN AVE., LAWRENCE AVE., FLORENCE PL., AND LOWELL AVE., IMPROVEMENTS PROJECT Page 19 of 76