181-26 Exhibit A- Final Specifications_compressed.pdf

602.02 MATERIALS THE FOLLOWING IS ADDED: In addition to all materials listed in the section, material for the following items shall include: • Refer to NJDOT Standard Specifications for materials for Setting Castings on Sanitary Manholes, Resetting Sanitary Manhole Castings & Reconstructing Sanitary Manholes. • Where indicated Heavy Duty ADA Compliant Grates as manufactured by Campbell Foundry or approved equal. • INLET, TYPE D AND RECONSTRUCTED INLET, TYPE D, USING NEW CASTING shall be: o Pattern Number 2617, curb pieces shall be Type 'N', as manufactured by Campbell Foundry Company of Harrison, New Jersey, or approved equal. All new castings shall include frame, bicycle safe grate, Type ‘N” Eco Curb piece and hardware. The Contractor is ultimately responsible to verify the dimensions of all castings prior to ordering. 602.03.03 Set Casting, Reset Casting, and Reconstructed Inlet and Manhole THE FIRST PARAGRAPH IS CHANGED TO: When modifying less than 1 foot of an inlet or manhole, set a new casting, or reset the existing casting. When modifying 1 foot or more of an inlet or manhole, reconstruct the inlet or manhole. THE FOLLOWING IS ADDED AFTER THE FIRST PARAGRAPH: As described herein and in pay items, ‘SET’ indicates that the Contractor is to provide new castings for Manholes and Inlets, including frames, grates, covers, curb piece, back plates, as shown on details for the pay item casting. THE FOLLOWING IS ADDED: Construction shall also be in accordance with NJDOT Standard Specifications. THE FOLLOWING IS ADDED: Set and rest castings to the proper elevation based on the final surface course. Before the work area is opened to traffic, provide smooth transitions from the pavement surface to the top of grate or cover. THE FOLLOWING SUBSECTION IS ADDED: 602.03.06, Manhole Covers and Bicycle Safe Grates THE FOLLOWING IS ADDED AFTER THE FIRST PARAGRAPH: Manhole covers within the pedestrian route are to be of a pattern that is slip resistant and no protrusions greater than ¼” high, see the plan details. Covers sizes are to be selected to fit into the existing manhole frame. THE FOLLOWING SUBPART(S) ARE ADDED: 602.03.07 Curb Pieces THE FOLLOWING IS ADDED: Curb Pieces to include storm drain labeling. THE FOLLOWING SUBPART(S) ARE ADDED: 602.03.09

xisting manhole frame. THE FOLLOWING SUBPART(S) ARE ADDED: 602.03.07 Curb Pieces THE FOLLOWING IS ADDED: Curb Pieces to include storm drain labeling. THE FOLLOWING SUBPART(S) ARE ADDED: 602.03.09 Inlet, Type A (If & Where Directed), Inlet, Type B (If & Where Directed) Inlet, Type D, Inlet Converted to Manhole, Reconstructed Manhole, Using New Casting, Parging Manhole (Full Depth of HELEN AVE., LAWRENCE AVE., FLORENCE PL., AND LOWELL AVE., IMPROVEMENTS PROJECT Page 54 of 76