Conference/Public Meeting Agendas/Documents — Packet

o. The location of all easements, within the subject property and within one hundred (100) feet of same. p. Four (4) copies of a map, referred to as a "Run Card", depicting the location of all fire hydrants within the subject property, and depicting the surrounding streets, based on a scale of one (1) inch equaling four hundred (400) feet, and contained on an eight and one-half by eleven (8.5 x 11) inch paper within an area not to exceed seven and one-half (7.5) inches in width and eight (8) inches in height. (Ord. No. 904-88 § 25-8.6C; Ord. No. 1723-00 § 1) 25-51.4 Major Subdivision Requirements - Preliminary Stage. a. No preliminary Subdivision Application shall be considered complete unless it fully conforms to subsection 25-8.6b of this section. All plats containing proposals or designs for drainage, streets and subdivision layouts shall be prepared by a professional engineer licensed to practice in the State of New Jersey and shall bear the address, signature, embossed seal and license number of the professional engineer. The preliminary plat shall be drawn at a scale not less than one hundred (100) feet to the inch for subdivision up to one hundred (100) acres in size and not less than two hundred (200) feet to the inch for subdivisions over one hundred (100) acres in size, shall be drawn on standard sheet of twenty-four (24) inches by thirty-six (36) inches and shall show or be accompanied by the information specified below. b. Title Block. The title block shall appear on all sheets and include the following: 1. Title of plan. 2. Name, if any. 3. Tax Map sheet block and lot number(s) of the tract to be subdivided as shown on the latest Township Map. 4. Acreage of tract to be subdivided to the nearest hundredth of an acre. 5. Date of original and all revisions. 6. Names and addresses of owner and subdivider so designated. 7. Name(s), signature(s), address(es) and license number(s) of the engineer and land surveyor who prepared the map. The plat shall bear the embossed seal of the engineer and land surveyor. c. Detailed Information. 1. A key map at a scale of not less than one (1) inch equals one thousand (1,000) feet showing the location of the

engineer and land surveyor. c. Detailed Information. 1. A key map at a scale of not less than one (1) inch equals one thousand (1,000) feet showing the location of the tract to be subdivided with reference to surrounding areas, existing streets which intersect or border the tract, the names of all such streets and any Township boundary is within five hundred (500) feet of the subdivision. 2. Names of all owners of parcels and property lines of parcels within two hundred (200) feet of the land to be subdivided including properties across the street as shown by the most recent records of the Township or of the municipality of which the property is a part. 3. The preliminary plat shall be based on a current certified boundary survey, with sufficient lines of the adjoining tracts surveyed to establish any overlay or gap between the adjoining boundary lines and boundary lines of the tract in question. Date of the survey and the name of the person mailing same shall be shown on the map. 4. Existing two (2) foot interval contours based on the United States Coast Geodetic Survey data shall be shown extending a minimum of one hundred (100) feet beyond the boundary of the tract in question and shall be certified by a New Jersey licensed surveyor 205