Township Council Meeting — Packet

Ocean 1.18 1.19 1.24 Passaic 1.21 1.27 1.50 Salem 1.20 1.23 1.32 Somerset 1.19 1.24 1.48 Sussex 1.24 1.29 1.50 Union 1.20 1.23 1.35 Warren 1.20 1.25 1.37 § 25-29.6—Sources for Technical Guidance: A. Technical guidance for stormwater management measures can be found in the documents listed below, which are available to download from the Department’s website at: https://dep.nj.gov/stormwater/bmp-manual/. 1. Guidelines for stormwater management measures are contained in the New Jersey Stormwater Best Management Practices Manual, as amended and supplemented. Information is provided on stormwater management measures such as, but not limited to, those listed in Tables 1, 2, and 3. 2. Additional maintenance guidance is available on the Department’s website at: https://dep.nj.gov/stormwater/maintenance-guidance/. B. Submissions required for review by the Department should be mailed to: The Division of Watershed Protection and Restoration, New Jersey Department of Environmental Protection, Mail Code 501-02A, PO Box 420, Trenton, New Jersey 08625-0420. § 25-29.7—Solids and Floatable Materials Control Standards: A. Site design features identified under § 25-29.4f above, or alternative designs in accordance with § 25-29.4g above, to prevent discharge of trash and debris from drainage systems shall comply with the following standard to control passage of solid and floatable materials through storm drain inlets. For purposes of this paragraph, “solid and floatable materials” means sediment, debris, trash, and other floating, suspended, or settleable solids. For exemptions to this standard see § 25-29.7a2 below. 1. Design engineers shall use one of the following grates whenever they use a grate in pavement or another ground surface to collect stormwater from that surface into a storm drain or surface water body under that grate: i. The New Jersey Department of Transportation (NJDOT) bicycle safe grate, which is described in Chapter 2.4 of the NJDOT Bicycle Compatible Roadways and Bikeways Planning and Design Guidelines; or 24 Deleted: Section IV.F Deleted: Section IV.G Deleted: Deleted: Section VII.A.2 Deleted: