V4 06 Response to Board Engineers Review 2 1 26 2023

n the pole is to be installed in a special wind region (as indicated by the wind map) or in an area where wind speed is unpredictable. AAL recommends consulting a local engineer when the pole is to be installed in an area that may be subject to extreme weather and exposure Poles installed on structures such as buildings and bridges may be subjected to vibration, oscillations, and other fatigue effects which are not covered by the AAL warranty. The use of banners or other appendages can severely affect the loading of a pole. No banner or other appendage should be attached to an AAL pole unless approved by AAL. If the products are to be used on an existing foundation or on other structures, the customer assumes all responsibility for the structural integrity of the existing foundation, anchorage or structures and all the consequences arising therefrom. CAUTION Poles should never be erected without the luminaire installed. Warranty is voided if the pole is erected without the luminaire. The warranty is PR4 AXIMUM ALLOWABLE EPA (MPH) 85 90 100 110 120 130 140 150 12.3 10.9 8.7 7 5.7 4.8 4.1 3.6 9.1 8 6.3 4.9 4.0 3.3 2.8 2.4 6.9 6 4.5 3.4 2.6 2.1 1.8 1.5 5.2 4.4 3.2 2.3 1.5 1.2 1 0.8 3.9 3.2 2.1 1.3 0.8 0.5 0.4 0.2 21.5 19.2 15.5 12.7 10.6 9.0 7.7 6.7 16.5 14.6 11.7 9.4 7.8 6.6 5.6 4.8 13.0 11.4 9 7.2 5.8 4.9 4.1 3.5 10.3 9.1 7 5.4 4.3 3.6 3 2.5 8.3 7.2 5.4 4.1 3.1 2.5 2.1 1.8 6.6 5.6 4.1 2.9 2.1 1.6 1.3 1 5.1 4.3 3.0 1.9 1.2 0.9 0.6 0.4 4. COLOR Base casting shall be heat treated to a T-6 condition, and of uniform wall thickness, with no warping or mold shifting. WARNINGS Caution must be exercised in the selection of a design wind speed when the pole is to be installed in a special wind region (as indicated by the wind map) or in an area where wind speed is unpredictable. AAL recommends consulting a local engineer when the pole is to be installed in an area that may be subject to extreme weather and exposure. Poles installed on structures such as buildings and bridges may be subjected to vibration, oscillations, and other fatigue effects which are not covered by the AAL warranty. The use of banners or other appendages can severely affect the loading of a pole. No banner or other appendage should be attached to an AAL pole unless approved by AAL. If the products are to be used on an existing foundation or on other structures, the customer assumes all

a pole. No banner or other appendage should be attached to an AAL pole unless approved by AAL. If the products are to be used on an existing foundation or on other structures, the customer assumes all responsibility for the structural integrity of the existing foundation, anchorage or structures and all the consequences arising therefrom. CAUTION Poles should never be erected without the luminaire installed. Receptacle Base Finish Mounting 4 5 6 7 SH ARD COLOR Antique Green Black Matte Black Corten Dark Bronze Dark Green Light Grey Matte Aluminum Medium Grey White Titanium CAUTION • Poles should never be erected without the luminaire installed. • Anchor bolts shall be hot dip galvanized steel. Eight galvanized hex nuts and flat washers, and a bolt circle template shall be provided. Anchor bolt for poles are 3/4” x 24” x 3”. CERTIFICATION • Certified UL 1598 in accordance with Article410 of ANSI/NFPA 70, National Electrical Code. ORDERING GUIDE Example: PR4-4R12-125-PCR-GFI-SBC-PTF-BLT CATALOG # POLE Series Shaft Options Control Receptacle Base Finish PR4 4" Round Pole 4R8-125 4R8-125 4R10-125 4R10-125 4R12-125 4R12-125 4R14-125 4R14-125 4R16-125 4R16-125 4R8-226 4R8-226 4R10-226 4R10-226 4R12-226 4R12-226 4R14-226 4R14-226 4R16-226 4R16-226 4R18-226 4R18-226 4R20-226 4R20-226 LR Ladder Rest PCR Photocontrol Receptacle PHC-120V Button Type Photocell, 120V PHC-208V Button Type Photocell, 208V PHC-240V Button Type Photocell, 240V PHC-277V Button Type Photocell, 277V SCP Sensor Control Programmable 120-277V SCP-347V Sensor Control Programmable 347V SCP-480V Sensor Control Programmable 480V GFI GFCI Receptacle DRB Duplex Receptacle RBC Receptacle Box Cover SBC 1-piece Cover 2PCBC 2-piece Cover BC1 12.75"Ø x 8.25"H 1pc. Cover BC2 12.75"Ø x 16.25"H 3pc. Cover BC5 14"Ø x 24"H 2pc. Cast Cover BC6 17"Ø x 13"H 2pc. Cast Cover BC7 18"Ø x 30"H 3pc. Cast Cover BC8 12"Ø x 36"H 2pc. Cast Cover ACBCR 14"Ø x 18" Arts & Crafts® Round 3pc. Cast Cover HB Hinged Base BLS Black Gloss Smooth BLT Black Matte Textured DBS Dark Bronze Gloss Smooth DBT Dark Bronze Matte Textured GTT Graphite Matte Textured LGS Light Grey Gloss Smooth LGT Light Grey Matte Textured PSS Platinum Silver Gloss Smooth VGT Verde Green Matte Textured WHS White Gloss Smooth WHT White Matte Textured Color Option CC 1 Custom Color Mounting TEN Tenon, 2 3/8" Ø x 4"H TEN3 Tenon, 3" Ø x 3"H 1A Single Side Arm 2B

oss Smooth VGT Verde Green Matte Textured WHS White Gloss Smooth WHT White Matte Textured Color Option CC 1 Custom Color Mounting TEN Tenon, 2 3/8" Ø x 4"H TEN3 Tenon, 3" Ø x 3"H 1A Single Side Arm 2B Double Side Arm PTF Post Top Fixture PTA Post Top Arm PTAD Post Top Adaptor ND No Drilling Maximum Allowable EPA (MPH) Series SHAFT OAH SHAFT WT 85 90 100 110 120 130 140 150 PR4 4R8-125 8' (2.4m) 4" RD x .125" 22 12.3 10.9 8.7 7.0 5.7 4.8 4.1 3.6 PR4 4R10-125 10' (3.1m) 4" RD x .125" 25 9.1 8.0 6.3 4.9 4.0 3.3 2.8 2.4 PR4 4R12-125 12' (3.7m) 4" RD x .125" 28 6.9 6.0 4.5 3.4 2.6 2.1 1.8 1.5 PR4 4R14-125 14' (4.3m) 4" RD x .125" 32 5.2 4.4 3.2 2.3 1.5 1.2 1.0 0.8 PR4 4R16-125 16' (4.9m) 4" RD x .125" 35 3.9 3.2 2.1 1.3 0.8 0.5 0.4 0.2 PR4 4R8-226 8' (2.4m) 4" RD x .226" 32 21.5 19.2 15.5 12.7 10.6 9.0 7.7 6.7 PR4 4R10-226 10' (3.1m) 4" RD x .226" 38 16.5 14.6 11.7 9.4 7.8 6.6 5.6 4.8 PR4 4R12-226 12' (3.7m) 4" RD x .226" 44 13.0 11.4 9.0 7.2 5.8 4.9 4.1 3.5 PR4 4R14-226 14' (4.3m) 4" RD x .226" 51 10.3 9.1 7.0 5.4 4.3 3.6 3.0 2.5 PR4 4R16-226 16' (4.9m) 4" RD x .226" 57 8.3 7.2 5.4 4.1 3.1 2.5 2.1 1.8 PR4 4R18-226 18' (5.5m) 4" RD x .226" 63 6.6 5.6 4.1 2.9 2.1 1.6 1.3 1.0 PR4 4R20-226 20' (6.2m) 4" RD x .226" 70 5.1 4.3 3.0 1.9 1.2 0.9 0.6 0.4 Notes: 1 Consult factory for custom color, marine and corrosive finish

PR4 ALUMINUM POLE currentlighting.com/aal © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions.Page 2 of 2 Rev 06/29/22 aal_pr4_spec_R01 DIMENSIONS DATE: LOCATION: TYPE: PROJECT: CATALOG #:

SSS-B Series Poles SQUARE STRAIGHT STEEL currentlighting.com/beacon © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions.Page 1 of 4 Rev 05/17/22 spec_sheet_sss_pole_beacon_R01 APPLICATIONS • Lighting installations for side and top mounting of luminaires with effective projected area (EPA) not exceeding maximum allowable loading of the specified pole in its installed geographic location CONSTRUCTION • SHAFT: One-piece straight steel with square cross section, flat sides and minimum 0.23" radius on all corners; Minimum yield of 46,000 psi (ASTM-A500, Grade B); Longitudinal weld seam to appear flush with shaft side wall; Steel base plate with axial bolt circle slots welded flush to pole shaft having minimum yield of 36,000 psi (ASTM A36) • BASE COVER: Two-piece square aluminum base cover included standard • POLE CAP: Pole shaft supplied with removable cover when applicable; Tenon and post-top configurations also available • HAND HOLE: Rectangular 3x5 steel hand hole frame (2.38" x 4.38" opening); Mounting provisions for grounding lug located behind gasketed cover • ANCHOR BOLTS: Four galvanized anchor bolts provided per pole with minimum yield of 55,000 psi (ASTM F1554). Galvanized hardware with two washers and two nuts per bolt for leveling Anchor bolt part numbers: 3/4 x 30 x 3 — TAB-30-M38 1 x 36 x 4 — TAB-36-M38 FINISH • Durable thermoset polyester powder coat paint finish with nominal 3.0 mil thickness • Powder paint prime applied over “white metal” steel substrate cleaned via mechanical shot blast method • Decorative finish coat available in multiple standard colors; Custom colors available; RAL number preferable WAREHOUSE ‘STOCKED’ POLES: • SSSH20-40A-4-HV-DB-RDC, SSSH25-40A-4-HV-DB-RDC and SSSH30-50B-4-HV-DB-RDC • The HV designation in the above catalog numbers is a combination drill pattern of the Current S2 pattern and the Beacon B3/B4 Viper pattern (rectangular arm mounting) Overall Height 10' - 40' Handhole 18" ORDERING INFORMATION BASE DETAILPOLE CAP TENON BASE COVER SERIES SSS-B Square Straight Steel Pole Beacon SSS B 25 40 A/B/C 2L BLTB3 UL 1 Removable tenon used in conjunction with side arm mounting. First specify desired arm configuration followed by the “TR” notation. Example:

e Straight Steel Pole Beacon SSS B 25 40 A/B/C 2L BLTB3 UL 1 Removable tenon used in conjunction with side arm mounting. First specify desired arm configuration followed by the “TR” notation. Example: SSS-B-25-40-A-1-B1-TR-BBT 2 Specify option location using logic found on page 2 (Option Orientation) 3 VM1 recommended on poles 20’ and taller with EPA of less than 1. MOUNTING ORIENTATION HEIGHT Reference page 2 Ordering matrix SHAFT Reference page 2 Ordering matrix THICKNESS Reference page 2 Ordering matrix OPTIONS GFI2 20 Amp GFCI Receptacle and Cover EHH2 Extra Handhole C052 .5” Coupling C072 .75” Coupling C202 2” Coupling MPB2 Mid-pole Luminaire Bracket VM2 2nd mode vibration damper LAB Less Anchor Bolts UL UL Certified ORDERING EXAMPLE: Reference page 2 for available configurations Anchor Base Detail Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Anchor Base Detail Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Anchor Base Detail Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Overall Height 10'-30' 18" TENON Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) Height of option in feet BASE COVER 270˚ 90˚ 180˚ 0˚ Handhole VIBRATION DAMPER 2ND MODE ACCESSORIES - Order Separately Catalog Number Description VM13 1st mode vibration damper VM2SXX 2nd mode vibration damper MOUNTING 1 Single arm mount 2 Two fixtures at 180˚ 2L Two fixtures at 90˚ 3T Three fixtures at 90˚ 4 Four fixtures at 90˚ TA Tenon (2.38” OD x 4” Tall) TB Tenon (2.88” OD x 4” Tall) TC Tenon (3.5” OD x 6” Tall) TR1 Removable Tenon (2.375 x 4.25) OT Open Top (in- cludes pole cap) TOP VIEW DRILL PATTERN B1 Cruzer, “AM” arm B3 2 bolt (2-1/2” spacing), Viper “A” arm S2 2 bolt (3-1/2” spacing), Viper “AD” arm FINISH BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth PSS

spacing), Viper “AD” arm FINISH BLT Black Matte Textured BLS Black Gloss Smooth DBT Dark Bronze Matte Textured DBS Dark Bronze Gloss Smooth GTT Graphite Matte Textured LGS Light Grey Gloss Smooth PSS Platinum Silver Smooth WHT White Matte Textured WHS White Gloss Smooth VGT Verde Green Textured Color Option CC Custom Color Denotes handhole location 1 2L 2 3T 3Y 4 Denotes handhole location 1 2L 2 3T 3Y 4 Denotes handhole location 1 2L 2 3T 3Y 4 Denotes handhole location 1 2L 2 3T 3Y 4 Denotes handhole location 1 2L 2 3T 3Y 4 Denotes handhole location 1 2L 2 3T 3Y 4 Denotes handhole location 1 2L 2 3T 3Y 4 DATE: LOCATION: TYPE: PROJECT: CATALOG #:

SSS-B Series Poles SQUARE STRAIGHT STEEL currentlighting.com/beacon © 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without notice. All values are design or typical values when measured under laboratory conditions.Page 2 of 4 Rev 05/17/22 spec_sheet_sss_pole_beacon_R01 Overall Height 10'-30' 18" TENON Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) Height of option in feet BASE COVER 270˚ 90˚ 180˚ 0˚ Handhole VIBRATION DAMPER 2ND MODE ORDERING INFORMATION Cont. NOTE Factory supplied template must be used when setting anchor bolts. Beacon Products will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template and anchor bolts. For more information about pole vibration and vibration dampers, please consult our website. Due to our continued efforts to improve our products, product specifications are subject to change without notice. Follow the logic below when ordering location specific options. For each option, include its orientation (in degrees) and its height (in feet). Example: Option C07 should be ordered as: SSS-B-20-40-A-TA-DB-CO5-0-15 (.5” coupling on the handhole/arm side of pole, 15 feet up from the pole base) 1’ spacing required between option. Consult factory for other configurations. OPTION ORIENTATIONGFI – 20 AMP GFCI RECEPTACLE & COVER EHH - EXTRA HANDHOLE C05 - C07 - C20 - COUPLING MPB - MID POLE BRACKET VM1 - VIBRATION DAMPER 1ST MODE VM2 - VIBRATION DAMPER 2ND MODE VM2SXX - VIBRATION DAMPER 2ND MODE Anchor Base Detail Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Provision for Grounding Anchor Base Detail Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. 1/2” - 14 NPSC Threads 3/4” - 14 NPSC Threads 2” -11.5 NPSC Threads Anchor Base Detail Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Square Steel Pole Attachment stub 5”

re 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Square Steel Pole Attachment stub 5” long welded to pole Arm, 3” Sq. x 13.5” long ships separately 2” pipe tenon 4.25” tall etail Bolt Circle Bolt Slots/Holes 0°-Handhole 270° Arm 1 Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Square aluminum pole Standard hand hole frame Adapter plate Gasket 20 AMP GFCI Wet Locations In-use Cover Anchor Base Detail Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Bolt Circle Bolt Slots/Holes 0°-Handhole Bolt Square 270° Arm 1 90° Arm 2 180° As viewed from top of pole. Overall Height 10'-30' 18" TENON Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) BASE COVER 270˚ 90˚ 180˚ 0˚ Handhole VM1 Pole Field Installed Pole Top damper designed to reduce pole top deflection or sway. VM1 is recommended for pole systems 25’ and taller with a total EPA of 1.0 or less. Factory installed, internal damper designed to alter pole resonance to reduce movement and material fatigue caused by 2nd mode vibration. Field installed, internal damper designed to alter pole resonance to reduce movement and material fatigue caused by 2nd mode vibration. VM2S08 – 8' VM2S12 – 12' VM2S16 – 16' VM2S20 – 20' VM2S24 – 24' Overall Height 10'-30' 18" TENON Bolt Circle (Outer) Bolt Circle (Inner) Bolt Square (Outer) Bolt Square (Inner) Height of option in feet BASE COVER 270˚ 90˚ 180˚ 0˚ Handhole VIBRATION DAMPER 2ND MODE Catalog Number Height Nominal Shaft Dimensions Wall Thick- ness Bolt Circle (suggested) Bolt Circle (range) Bolt Square (range) Base Plate Square Anchor bolt size Bolt Projection Pole weight Feet Meters SSS-B-10-40-A-XX-XX 10 3.0 4” square 0.125” 9” 8” - 10” 5.66” - 7.07” 9” 3/4” x 30” x 3” 3.5 77 SSS-B-12-40-A-XX-XX 12 3.7 4” square 0.125” 9” 8” - 10” 5.66” - 7.07” 9” 3/4” x 30” x 3” 3.5 90 SSS-B-14-40-A-XX-XX 14 4.3 4” square 0.125” 9” 8” - 10” 5.66” - 7.07” 9” 3/4” x 30” x 3” 3.5 103 SSS-B-16-40-A-XX-XX 16 4.9 4” square 0.125” 9” 8” - 10” 5.66” - 7.07” 9” 3/4” x 30” x 3” 3.5 116 SSS-B-18-40-A-XX-XX 18 5.5 4” square 0.125” 9” 8” - 10” 5.66” - 7.07” 9” 3/4” x 30” x 3” 3.5 129 SSS-B-20-40-A-XX-XX 20 6.1 4” square 0.125” 9” 8” - 10”

- 10” 5.66” - 7.07” 9” 3/4” x 30” x 3” 3.5 116 SSS-B-18-40-A-XX-XX 18 5.5 4” square 0.125” 9” 8” - 10” 5.66” - 7.07” 9” 3/4” x 30” x 3” 3.5 129 SSS-B-20-40-A-XX-XX 20 6.1 4” square 0.125” 9” 8” - 10” 5.66” - 7.07” 9” 3/4” x 30” x 3” 3.5 142 SSS-B-25-40-A-XX-XX 25 7.6 4” square 0.125” 9” 8” - 10” 5.66” - 7.07” 9” 3/4” x 30” x 3” 3.5 175 SSS-B-14-40-B-XX-XX 14 4.3 4” square .188” 11” 10” - 12” 7.07” - 8.48” 10.50” 3/4” x 30” x 3” 3.5 152 SSS-B-16-40-B-XX-XX 16 4.9 4” square .188” 11” 10” - 12” 7.07” - 8.48” 10.50” 3/4” x 30” x 3” 3.5 171 SSS-B-18-40-B-XX-XX 18 5.5 4” square .188” 11” 10” - 12” 7.07” - 8.48” 10.50” 3/4” x 30” x 3” 3.5 190 SSS-B-20-40-B-XX-XX 20 6.1 4” square .188” 11” 10” - 12” 7.07” - 8.48” 10.50” 3/4” x 30” x 3” 3.5 209 SSS-B-25-40-B-XX-XX 25 7.6 4” square .188” 11” 10” - 12” 7.07” - 8.48” 10.50” 3/4” x 30” x 3” 3.5 257 SSS-B-30-40-B-XX-XX 30 9.1 4” square .188” 11” 10” - 12” 7.07” - 8.48” 10.50” 3/4” x 30” x 3” 3.5 304 SSS-B-16-50-B-XX-XX 16 4.9 5” square .188” 11” 10.25” - 13.25” 7.25” - 9.37” 11.50” 1” x 36” x 4” 4.5 219 SSS-B-18-50-B-XX-XX 18 5.5 5” square .188” 11” 10.25” - 13.25” 7.25” - 9.37” 11.50” 1” x 36” x 4” 4.5 243 SSS-B-20-50-B-XX-XX 20 6.1 5” square .188” 11” 10.25” - 13.25” 7.25” - 9.37” 11.50” 1” x 36” x 4” 4.5 267 SSS-B-25-50-B-XX-XX 25 7.6 5” square .188” 11” 10.25” - 13.25” 7.25” - 9.37” 11.50” 1” x 36” x 4” 4.5 327 SSS-B-30-50-B-XX-XX 30 9.1 5” square .188” 11” 10.25” - 13.25” 7.25” - 9.37” 11.50” 1” x 36” x 4” 4.5 387 SSS-B-25-50-C-XX-XX 25 7.6 5” square .25” 11” 10.25” - 13.25” 7.25” - 9.37” 11.50” 1” x 36” x 4” 4.5 427 SSS-B-30-50-C-XX-XX 30 9.1 5” square .25” 11” 10.25” - 13.25” 7.25” - 9.37” 11.50” 1” x 36” x 4” 4.5 507 SSS-B-20-60-B-XX-XX 20 6.1 6” square .188” 12” 11.00” - 13.25” 7.81” - 9.37” 12.25” 1” x 36” x 6” 4.5 329 SSS-B-25-60-B-XX-XX 25 7.6 6” square .188” 12” 11.00” - 13.25” 7.81” - 9.37” 12.25” 1” x 36” x 6” 4.5 404 SSS-B-30-60-B-XX-XX 30 9.1 6” square .188” 12” 11.00” - 13.25” 7.81” - 9.37” 12.25” 1” x 36” x 6” 4.5 479 SSS-B-35-60-B-XX-XX 35 10.7 6” square .188” 12” 11.00” - 13.25” 7.81” - 9.37” 12.25” 1” x 36” x 6” 4.5 554 SSS-B-40-60-B-XX-XX 40 12.2 6” square .188” 12” 11.00” - 13.25” 7.81” - 9.37” 12.25” 1” x 36” x 6” 4.5 629 DATE: LOCATION: TYPE: PROJECT: CATALOG #: