04_AECOM_Environmental Report_Final

s WFeeir=' Wonder Smokehouse Testing amber 60735150 Particulate Matter (incl. Condensable) Pate GC Fl sgr4, EPA Method 5/202 source Stack Moisture Determination A Imp No. | Contents | Volimy | Configuration! initial Wein) Final Weel ZW 1 empty Short Stem sath 7 3 oc q v 2 [em [| me | GOOF | G06.6 y a water | 100 mos | “Z27, YlF VY 4 | SuicaGel | ~300g Mod 5 (¥ t gf A%G, ™“ b U Filter ~~ iter 10 SEGry | “ Kn BT4858/ “ECS | S Sample Log mo; Sample 10 Number ene | Description} =o Wondstk1 ~ (2 4 -M5/202-FNR asom | rene ans Y Wondstkt __ 24 -M5/202-Filt Petri Dish Futter nl Wondstki _ 2. & +M5/202-WiRns | 1000 ml | Water Binse | wv) Wondstkt =. (24 -MS/202-OrgRns | 250mi__| Organic Rinse J Wondstki (2 “f 15/202 CPMIiit | Petr oish | CPM Fier Ty Condition ther load Faug [Balance ID S20 ai {bert Sample Recavery Checklist Rinse and brush probe and nezile with acetone (three times) inta PNR sample bottle Disconnect transfer line. Transfer any water in transfer line or condenser into the knockout impinger Rinse transfer line and condenser with water (two times) into water rinse sampie bottle Rinse with acetone {one time) and hexane (two times) into the org: rinse sample bottle. Transfer water [rom knockout impinger to second impinger Ensure that water tevel is at least 1 cm above stem tp. Add water if necessary Volume of water added" If all water in knockout impinger wall not fit in second mmpinger, replace stem on knockout impinger Ensure that the water level in the first impinger is at least 1 cm above stem tp. Add water if necessary. Volume af water added: Purge with nitrogen for ane hour at >14 liters per minute Record start and end.times on the data sheet Start Stop Separate filter holder and place filter in clean pre-rinsed gtays petri dish. Complete Filt sample label. Rinse front half of filter holder with acetone (three times) into PNA bottle Complete probe and nozzle rinse {PNR) sample latel. Rinse the back half of the filter holder and any connecting glassware with water (two times) into the water rinse sample battle Rinse the back hall of the filter holder and any connecting glassware with acetone [one time) and with hexane (two times) into the organic rinse sample bottle Separate CPM Iilter holder and place CPM filter in clean pre-rinsed glass petri dish. Complete CPM-Filt sample label. Disassemble sample train, wpe off excess water and

e organic rinse sample bottle Separate CPM Iilter holder and place CPM filter in clean pre-rinsed glass petri dish. Complete CPM-Filt sample label. Disassemble sample train, wpe off excess water and weigh each impinger. Record the final weights in the Moisture Determination section of this data sheet _.. % spent Pour the contents of the first two impingers into the water rinse calch bottie(s). Rinse impingers, cannecting glassware. And the front half of the CPM filter holder two mes with water into the same bottles. Complete water rinse sample label Note condition of the silica ge! impinger. Rinse the first two impingers, connecting glassware, and the front half of the CPM filter halder acetone (one time} and hexane (two times) into the organic rinse sample bottle[s) Log samples into logboak and stare appropriately z 3 ct a ROS-47 + PM and Condensables| by EPA Method 5/202 Per: EM SOP-047| Issued: July 2023} Document reviewed bennially|