Grading Checklist Feb 2026 resubmissionrcd 2 26 2026

Dept. of Engineering: June 2025 4 of 5 Grading Plan Design Items – Checklist (to be submitted with your application) *Check that these items are included in the plans you are submitting for review Name, Address of owner and applicant. Name, signature, license number, seal and address of engineer, land surveyor, architect, as applicable, involved in preparation of plan. Title block denoting type of application, tax map sheet, county, name of municipality, block and lot and street location. A key map at specified scale showing location of tract with reference to surrounding properties, streets, municipal boundaries, etc., within 500 feet. A schedule of required and provided zone district(s) requirements including lot area, width, depth, yard setbacks, building coverage, open space, parking, etc. North arrow and scale. Standardized sheets: 24” x 36” Boundary Survey is to scale, prepared within 5 years of the proposal, and extends 25-feet beyond the property line to include neighboring properties and nearby features, including trees on property line. Grading and Drainage/Stormwater Management facilities map of the same scale as the topographical base map shall be included Topographic Base Map. The design engineer shall provide sufficient topographic and location data that shows existing contours, at a scale no greater than 1” =30’ to allow the Township Engineer to make an appropriate evaluation of the development proposal. The topography and existing conditions must be based on a plan prepared by a NJ licensed surveyor. Project Development Plans. A map at the scale of the topographical base map indicating the location of existing and proposed buildings, proposed contours and other improvements shall be provided. Contour lines showing the existing topography of the property in light grey and dashed lines, and any changes to those contour lines, shown in black ink and solid lines. Project items for construction are clearly shown to scale in in black ink and labeled. Limit of disturbance is marked and labeled showing the area in square feet and acres. Total area to be disturbed, paved, or built upon, land area to be occupied by the stormwater management facilities and the type of vegetation thereon, and details of the proposed plan to control discharge. Existing and proposed spot elevations at building corners, property corners, street gutter line, top of curb, top

the type of vegetation thereon, and details of the proposed plan to control discharge. Existing and proposed spot elevations at building corners, property corners, street gutter line, top of curb, top of depressed curb, top and bottom of wall and around structures. Finished floor, basement/cellar, and garage floor elevations. Soil Erosion Control Measures (such as silt fence, hay bales, filter fabric, construction access tracking pad, etc.) are marked and labeled. DO NOT TRENCH NEAR PROTECTED TREES.