13 Porter Rd Application package rcd 6 2 2026

PER UL-305 4 SCALE:3/8"-1'-0" 2 SIMPSON MODEL #: WOOD STUDS- Nom 2 by 4 in. spaced 16 in. OC max, effectively firestopped. HTT 16 HOLD DOWN STRUCTURE RIM BOARD SHEATHING

SHEATHING JOINTS AND NAIL-HEADS-Joints covered with joint compound and paper tape. Joint compound and paper tape may be omitted when square edge boards are used. CASING BEAD As an alternate , nom. 3/32 in. thick gypsum veneer plaster 3"x3"x.229" PLATE WASHER may be applied to the entire surface of classified veneer

may be applied to the entire surface of classified veneer EXPANDED METAL LATH baseboard with the joints reinforced with paper tape. NOTE: 5/8" DIA x18" ANCHOR BOLT Nailheads exposed or covered with joint compound. BASEMENT LEVEL SCRATCH COAT 16 ALL HOLD DOW STRAPS AND SEAR WALL 2x CONT. P.T. WOOD SILL 5/8" DIA THREADED ROD

2x CONT. P.T. WOOD SILL 5/8" DIA THREADED ROD TY " P. JOIST ( AS NOTED GYPSUM BOARD- 5/8 in. thick LOCATION REFEREED BY THE FLOOR PLAN - ON PLANS) paper or vinyl surface, with STRUCTURAL ENGINEER CONC. OR CMU FOUNDATION

PROVIDE SOLID WD. beveled, square, or tapered edges, PROPOSED applied either horizontally NOTE: PSL HDR. OR GDR. AS PER PLAN BLOCKING 16" O.C. @

or vertically. Gypsum panels CMU END BAYS PERP. TO FINISH ( SMOOTH OR nailed 7 in. oc with 6d cement AS PLYWOOD LESS THAN 24" EXT. WALL TEXTURED) coated nails 1 7/8 in. long . 0.0915 TO GRADE Drawn By: AJG Checked

coated nails 1 7/8 in. long . 0.0915 TO GRADE Drawn By: AJG Checked By: FC3 TYPICAL 3"x3"x9/16" BEARING PLATE in. shank dia. and 15/64 in. dia. IS TO BE PRESSURE TREATED 2"x6" P.T.. SILL PLATE BP BEARING heads. When used in widths other than 48 in. gypsum PLATE DETAIL SHEAR WALL HOLD DOWN

other than 48 in. gypsum PLATE DETAIL SHEAR WALL HOLD DOWN STUCCO DTL. Simpson Strong-Tie N.T.S. @ GIRDER 5 N.T.S. BLOCKING DETAIL panels are be installed horizontally. A-100 25-003 A-100 N.T.S.

A-100 25-003 A-100 N.T.S. N.T.S. FRAMING DETAILS 1 2 As indicated 25-003 04-06-2025 3/8" = 1'-0" © F E D C

D C B A