13 Porter Site Plan Updated rcd 9 1 2026

tape may be omitted when square edge boards are used. CASING BEAD As an alternate , nom. 3/32 in. thick gypsum veneer plaster 3"x3"x.229" PLATE WASHER may be applied to the entire surface of classified veneer EXPANDED METAL LATH baseboard with the joints reinforced with paper tape. NOTE: 5/8" DIA x18" ANCHOR BOLT

Nailheads exposed or covered with joint compound. BASEMENT LEVEL SCRATCH COAT 16 ALL HOLD DOW STRAPS AND SEAR WALL 2x CONT. P.T. WOOD SILL 5/8" DIA THREADED ROD TY " P.

JOIST ( AS NOTED GYPSUM BOARD- 5/8 in. thick LOCATION REFEREED BY THE FLOOR PLAN - ON PLANS) paper or vinyl surface, with STRUCTURAL ENGINEER CONC. OR CMU FOUNDATION PROVIDE SOLID WD. beveled, square, or tapered edges, PROPOSED

PROPOSED applied either horizontally NOTE: PSL HDR. OR GDR. AS PER PLAN BLOCKING 16" O.C. @ or vertically. Gypsum panels CMU END BAYS PERP. TO FINISH ( SMOOTH OR

FINISH ( SMOOTH OR nailed 7 in. oc with 6d cement AS PLYWOOD LESS THAN 24" EXT. WALL TEXTURED) coated nails 1 7/8 in. long . 0.0915 TO GRADE Drawn By: AJG Checked By: FC3 TYPICAL 3"x3"x9/16" BEARING PLATE in. shank dia. and 15/64 in. dia. IS TO BE PRESSURE TREATED

2"x6" P.T.. SILL PLATE BP BEARING heads. When used in widths other than 48 in. gypsum PLATE DETAIL SHEAR WALL HOLD DOWN STUCCO DTL. Simpson Strong-Tie N.T.S. @ GIRDER 5 N.T.S. BLOCKING DETAIL

BLOCKING DETAIL panels are be installed horizontally. A-100 26-052 A-100 N.T.S. N.T.S. FRAMING DETAILS 1 2

As indicated 26-052 08-31-2026 3/8" = 1'-0" © F E D C B A