93-24 Attachment.pdf

SCE-P12851.021 February 16, 2024 Planimetric mapping of the project area will be developed from the site survey, with a maximum scale of one-inch equals twenty-feet (1" = 20’) to depict the project limits. Topography will be depicted at 1-foot contour intervals with appropriate spot grade elevations. SCE will depict the location of underground utilities within the project area based on existing mark-out as well as the visible surface structures and review of previously available mapping provided to SCE. All available utility information will be identified and noted at both surface and subsurface level. On-site and off-site utilities will be investigated as readily accessible based on the project site conditions. It is the responsibility of the Township, prior to SCE mobilizing, to ensure all relevant utility structures can be opened and are clear of any debris to obtain necessary measurements within the structures. SCE will make a reasonable attempt to access each structure, within the project limits, during the field survey and if any issues are encountered, they will be noted accordingly on the survey. The field survey work will depict current site conditions, surface features, and topography. SCE will utilize Civil 3D design software to map and model the existing and proposed conditions. The model will be utilized to establish proper grading and drainage improvements. Anticipated Survey Limits A Partial Topographic Survey of the project area will be created, and it is understood, will be the basis of the permitting. Property lines and/or easements shall be shown per the latest Tax Maps from the local authorities and from information made available. It should be noted that a Boundary Survey of the overall site or establishment of the adjacent boundary lines is not included in this scope of work. Should a boundary survey be required, a separate proposal for such services will be provided.