98-24 Exhibits to the Agreement for the Operation of the Recycling Center - Part III.pdf

RELIABLE WOOD PRODUCTS LLC 132685 CBG190002 Class B Recycling Ctr General Apprv -Renewal Requirements Report Subject Item: RCBG799457 - Class B Recycling Facility 53, 55. 56. 57. ‘The recycling center is authorized to store processed and unprocessed materials in the designated storage areas with the maximum authorized capacities, as specified on the approved site plan: Area 2; Unprocessed Asphalt, Concrete, Brick and Block - 28,900 cubic yards Area 3: Processed Asphalt, Concrete, Brick and Block - 27,500 cubic yards Area 4: Concrete fines (processed concrete byproduct) - 7,100 cubic yards Area 5: Unprocessed Brush, Tree Stumps and Tree Parts - 21,600 cubic yards; Unprocessed Wood - 18,460 cubic yards Area 6: Processed Brush, Tree Stumps, Tree Parts, and Wood - 42,500 cubic yards Area 7: Unprocessed Top Soil (includes by products of stunp processing) - 25,000 cubic yards Area 8: Processed Top Soil - 7,700 cubic yards Ifat any time, the total amount of processed and unprocessed material stored onsite reaches the maximum authorized capacities shown on the approved site plan, the recycling center shall immediately cease receiving additional unprocessed material until the amount of processed and unprocessed material stored onsite falls below the total authorized storage capacity. Under such circumstances, arrangements shal] be made to transfer processed materials offsite. While transfering processed material offsite, any processed material in an unprocessed material storage area (see Condition 55 below) shall be transferred first. [N.J.A.C. 7:26A- 3.5(e)] Unprocessed recyclable material shall not remain on-site, in its unprocessed form, for more than one (1) year. [N.L.A.C, 7:26A-3.5(e)] In the event that a processed material storage area has reached its maximum authorized capacity, the permittee may temporarily store excess processed material in an unprocessed material storage area subject to availability of additional capacity in that area, ‘as long as processed and unprocessed material are separated by either a physical barrier or by maintaining at least eight (8) feet of aisle space between the piles. Under no circumstances shall the combined volume of processed and unprocessed material exceed that area's maximum authorized storage capacity. [N.J.A.C. 7:26A- 3.5(e)] All processed material shall be stored separately from residues, [N.J.A.C.

olume of processed and unprocessed material exceed that area's maximum authorized storage capacity. [N.J.A.C. 7:26A- 3.5(e)] All processed material shall be stored separately from residues, [N.J.A.C. 7:264-3.5(e)] By-products shall be stored in the container(s) or area(s) as depicted on the approved site plan and shall be removed off-site to the end markets as referenced in the approved documents. [N.J.A.C. 7:26A-3.5(e)] ; Horizontal and vertical control points for the unprocessed and processed materials stockpile areas shall be set and maintained on-site. Horizontal limitation markers shall be set at the comers of the stockpile areas as depicted on the approved site plan. Vertical limitation markers shall be set at locations in close proximity of the stockpile areas and shall clearly establish the following elevation heights above existing grade for material stockpiles: Processed asphalt, concrete, brick and block stockpile - 25 feet All other unprocessed and processed material stockpiles - 15 feet Metal pipes/rods or the equivalent approved by the Department shall be used to establish these control points. [N.J.A.C, 7:26A- 3.5(e)] Page 1-7 of 1-9

RELIABLE WOOD PRODUCTS LLC 132685 CBG190002 Class B Recycling Ctr General Apprv -Renewal Requirements Report Subject Item: RCBG799457 - Class B Recycling Facility 59. 60. 61. 62. 63. Ingress and egress of the facility shall be restricted to Houses Comer Road only. [N.J.A.C. 7:26A-3.5(e)] Methods of effectively controlling dust shall be implemented at the facility in order to prevent offsite migration. [N.J.A.C. 7:26A-3.5(e)] - Fire fighting and emergency procedures shall be posted, and shall include the telephone numbers of local fire, police, ambulance, and hospital facilities. If a fire occurs on-site, the facility shall immediately notify the local fire official and report the incident to the N.J.D.E.P. Environmental Action Hotline at 1-877-927-6337. [N.J.A.C. 7:26A- 3.5(e)] Any suspected or prohibited hazardous waste, as defined at N.J.A.C. 7:26G-5, found in a load accepted at the recycling center shall not be returned to the generator. Such materials shall be segregated and stored in a secure manner and shall be immediately reported to the N.J.D.E.P. Environmental Action Hotline at 1-877-927-6337. The owner/operator of the recycling center shall secure the name of the collector/hauler suspected of delivering such waste to the facility and related information surrounding the incident, if available, and shall make this information known to N.J.D.E.P. enforcement personnel. Such materials may be returned to a known generator, provided the specific permission to do so is received by the owner/operator after contacting 1-877-927-6337. Otherwise, the owner/operator shall dispose of the unauthorized waste in accordance with instructions received from the Department. [N.J.A.C. 7:26A- 3.5(e)] Pursuant to N.J.A.C. 7:26A-3.11(a), the holder of this general approval shall obtain prior approval from the Department for any increase in the design capacity of the facility. The facility shall submit a request to the Department, in writing, for the proposed increase and shall submit updated information pursuant to the requirements of N.J.A.C. 7:26A-3.2(a), 3.4, or 3.8, as applicable, The facility shall also provide written notice of the request to the solid waste or recycling coordinator of the applicable district. [N.J.A.C, 7:26A-3.5(e)] Page -8 of 1-9

RELIABLE WOOD PRODUCTS LLC 132685 CBG190002 Class B Recycling Ctr General Apprv -Renewal Requirements Report Subject Item: RCBG799457 - Class B Recycling Facility 64. 65. The following processing equipment or equivalent are authorized for site operations and shall be maintained in operable conditions: 2017 Case 921 Loader (2 units) 2015 John Deere 644K Loader 2015 Doosan DL350 Loader 2017 Case 300 Excavator 2013 John Deere 250G Excavator 2013 Diamond Z 7000 Grinder 2018 Doppstadt 720 Screener 2014 Royer 620H Screener 2018 McClosky 628 Colorizer 2008 Finaly Stacker (2 units) If any of the above listed equipment need to be replaced, the holder of this general approval must notify the Bureau, within two (2) weeks of of such replacement, along with specifications for the relacement equipment at the following mailing address: New Jersey Department of Environmental Protection, Division of Solid and Hazardous Waste, Bureau of Recycling and Hazardous Waste Management, P.O. Box 420, Mail Code 401-02C, Trenton, New Jersey 08625-0420. Where applicable, the holder of this general approval must apply to the Department for any air permits required for the replacement equipment. Requisite recycling operations shall not be delayed or neglected for lack of required equipment or for equipment down time. [N.J.A.C. 7:26A- 3.5(e)] Pursuant to N.J.A.C. 7:26-3.2(a)18, the holder of the general approval shall ensure that all recycling activities authorized by this general approval are conducted in full compliance with the applicable Storm Water Management rules at N.J.A.C. 7:8-5 and 6 and the Pollutant Discharge Elimination System rules at NJ.A.C. 7:14A-24 and 25. In the event that compliance with the above rules require changes to the site plan or any operations authorized by this general approval, the holder of the general approval shall submit a modification application including a revised site plan within thirty (30) days of receiving all approvals/permits from the Department's Division of Water Quality to the Bureau of Recycling and Hazardous Waste Management for review and approval. [N.J.A.C. 7:26A- 3.5(e)] Page L-9 of 9