Montclair Stables Lighting Catalog Cuts

LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • (513) 372-3200 • www.lsicorp.com ©LSI Industries Inc. All Rights Reserved. Specifi cations and dimensions subject to industry standard tolerances. Specifi cations subject to change without notice. Have questions? Call us at () -Page 10/10 Rev. 07/01/25 SPEC.1046.B.1122Type:Mirada Small Area Light (MRS) CONTROLS Integral Bluetooth™ Motion and Photocell Sensor (IMSBTxL) Slim low profile sensor provides multi-level control based on motion and/or daylight. Sensor controls 0-10 VDC LED drivers and is IP66 rated for cold and wet locations (-40°F to 167°F). Two unique PIR lenses are available and used based on fixture mounting height. All control parameters are adjustable via an iOS or Android App capable of storing and transmitting sensor profiles. Click here to learn more details about IMSBT AirLink Blue (ALBMRxLR, ALBCSx) Wireless Bluetooth Mesh Lighting Control System that incorporates Luminaire Level Lighting Controls (LLLC) and high-end trim to provide energy savings code compliance and enhanced safety/security for parking lots and parking garages. Three key components; Bluetooth wireless radio/sensor controller, Time Keeper and an iOS App with technology partner Silvair. Capable of grouping multiple fixtures and sensors as well as scheduling time-based events by zone. Radio/Sensor Controller is factory integrated into Area/Site, Wall Mounted, Parking Garage and Canopy luminaires. Click here to learn more details about AirLink Blue Sensor Sequence of Operations Standard Programming On Event Off Event On Light Level Dim Light Level Daylight Harvesting Delay To Off Sensitivity IMSBTxL Motion No Motion 100% N/A On; Auto Calibration 20 minutes High Operation Description On Event Trigger that activates lights to turn on; either automatic via motion detected or manually activated via push of button. Off Event Trigger that activates lights to turn off; either automatic via no motion detected or manually activated via push of button. On Light Level The light level that the fixtures will turn on to when ON EVENT occurs. Dim Light Level The light level that the fixtures will dim down to when no motion is detected. Delay to Dim The amount of time after which no motion is detected that the fixtures will be triggered to dim down. This sequence is optional, and sensor can be programmed to only trigger

is detected. Delay to Dim The amount of time after which no motion is detected that the fixtures will be triggered to dim down. This sequence is optional, and sensor can be programmed to only trigger the fixture to turn off by entering 100% in this field. Delay to Off The amount of time after which no motion is detected that the fixtures will be triggered to turn off. If delay to dim is part of the programmed functionality, this is the amount of time after which no motion is detected after the fixture have already dimmed down. Sensitivity The sensitivity can be set to high, medium, low, or auto where applicable. High will detect smaller, simple motions. Low will only detect larger more complex motions. Auto temperature calibration adjusts the PIR sensitivity as ambient temperature rises to increase detection of heat movement through the field of view. Apple Apple AndroidLEVITON App AirLink Blue App Back to Quick Links